w w w . d e l l . c o m s u p p o r t . d e l l . c o m
3Open the computer cover.
4Install the
See the manufacturer’s documentation for more information.
5Connect the
To locate the TAPI connector on the system board, see "System Board Components" or the interior service label.
6Connect the
To locate the TAPI connector on the expansion card, see the manufacturer’s documentation.
7Close the computer cover.
8Stand the computer upright.
9Reconnect the computer and devices to their electrical outlets, and turn them on.
NOTE: If enabled, the Chassis Intrusion option will cause the following message to be displayed at the next system
ALERT! Cover was previously removed.
10Install the appropriate TSP for the TAPI device.
See the manufacturer’s documentation and your Windows documentation for more information.
Installing a TAPI Sound Card
You can install a
CAUTION: Before you perform this procedure, see "Safety First— For You and Your Computer."
NOTICE: Before disconnecting a device from the computer, wait 10 to 20 seconds after disconnecting the computer from its electrical outlet. Before removing a component from the system board, verify that the standby power light on the system board has turned off. To locate this light, see "System Board Components" or the interior service label.
1Turn off the computer and devices, disconnect them from their electrical outlets, and wait 10 to 20 seconds.
58