PaperJet 300 user guide ~ Edition 3.2 ~ 25th july ’01 ~ 3693
To print a fax stored in the memory
If you have received faxes into the memory the Fax in memory light flashes and the display shows the reason for the document not being printed normally – PRINTER ERROR!, CHECK PAPER! or INK OUT
Either add new paper, clear the jam or replace the ink cartridge accordingly.
Paper jam and out of ink warning:
If the plain paper jams or the ink cartridge runs out during printing, the display shows CHECK PAPER or OUT OF INK.
Clear the paper jam, see page 50.
Replace the ink cartridge, see page 51.
Printer Reset Then press Printer Reset to print out the document that has been stored in the memory.
Printer Reset
Press Printer Reset. The fax stored in the memory will print out.
Clear a paper jam, see page 50.
Replace the ink cartridge, see page 51.
If the memory becomes full while there is paper in the paper tray:
This happens if the fax is too large for the PaperJet 300 to handle. Pages received before the memory became full will be printed but, you will need to ask the sender to
Very detailed pages or photos may need to be sent singly.
Power failure while a fax is stored in the memory:
If the power fails and a document is stored in the memory, the stored fax is lost. Your PaperJet 300 informs you with a power failure report giving details of any documents lost from memory. When the power is restored the display will show
MEMORY DATA LOST.
25