Matsushita CF-30CTQAZBM Test item Stanard, Content of standard test Content of enhancing test

Page 20

7.1. Test Item and Division of trouble

	Test item	Stanard	Enhancing			Content of standard test	Content of enhancing test			Place with possibili-
	Test item	Stanard	Enhancing			Content of standard test	Content of enhancing test			ty of breakdown
										ty of breakdown

	CPU /					CPU is shifted to protected mode, and				CPU /
	SYSTEM					"Violation of the paging", "Operation of				Main board
						the violation of a privileged instruc-
						tion", and DMA, INT, TIMER, and the
						RTC operation are confirmed.

	RAM					All memory space is tested in a spe-				Memory / Main-
						cial memory access pattern based on				board
						"R.S.T . technology".

	HDD					The record area frequently accessed	All record area is tested.			HDD /
						with Microsoft Windows XP to test in				Mainboard /
						about two minutes regardless of				Cable /
						points of HDD is emphatically tested.				Connector

	MODEM					It is confirmed not to find abnormality				MODEM/ Main-
						in the AC97 modem controller.				board
						in the AC97 modem controller.				board

	Wireless					It is confirmed not to find abnormality				Wireless LAN
	Wireless					in the Wireless LAN modem controller.				Wireless LAN
	LAN					in the Wireless LAN modem controller.				board /
	LAN									board /
										Connector /
										Connector /
										Mainboard

	Sound *5
	Sound *5

	USB					It is confirmed not to find abnormality	It is confirmed not to find ab-			Mainboard /
						in the USB controller.	normality in the wiring be-			Connector
			*1				tween the USB controller and
			*1				the connector by confirming
							the connection of the USB
							equipment connected with the
							USB connector.

	LAN					It is confirmed not to find abnormality	It is confirmed not to find ab-			Mainboard /
			*2			in the LAN controller.	normality in the wiring be-			Connector
			*2				tween the controller and the
							tween the controller and the
							connector by connecting to
							HUB with LAN cable.

	PC Card					It is confirmed not to find abnormality				Mainboard
						in the CardBus controller.
						in the CardBus controller.

	SD					It is confirmed not to find abnormality				Mainboard
						in the SD controller.
						in the SD controller.

	Keyboard		*3			It is confirmed not to find abnormality	The key is actually input, and			Mainboard /
			*3			in keyboard controller’s keyboard inter- the operation is displayed on				Keyboard
										Keyboard
						face.	the screen.

	Touch Pad		*4			Whether keyboard controller’s mouse	The operation is actually dis-			Mainboard /
						interface operates normally is con-	played on the screen by oper-			Touch Pad
						firmed.	ating the touch pad.

	DVD-ROM		*6			The drive is normally reset, and it is	It is confirmed to be able to			Mainboard /
						accessible is confirmed.	read media normally.			Touch Pad

7-4

Image 20

Contents

Model No. CF-30CTQAZBM How to replace the fuse For U.K This apparatus must be earthed for your safetyLaser Safety Information Page Page Contents Specifications Model NoAge*20, Recover ProTM 6*20 Only for model with wireless LANOnly for model with Bluetooth You need to install to use the featureNames and Functions of Part E F G Diagram Diagnosis Procedure Troubleshooting Outline of Post Error Diagnosis by Checking Beep Signal SoundBeep signal sound Error message Stuck key 02F0 CPU ID Self Diagnosis Test Operation of PC-Diagnostic Utility Selection of tested device PC-Diagnostic utility End methodContent of the setup is returned to the setting of the user Content of standard test Content of enhancing test Record area frequently accessed All record area is testedTest item Stanard Ty of breakdownContent of Standard Test Content of Extend Test Express Card ConnectorWiring between Super I/O Test ItemWiring Connection Diagram Removing the Battery Pack and HDD Preparation PackBoard Removing the KB Cable Cover and LCD Cable Cover Removing the GPS PCB and Blue- tooth PCBRemoving the Dimm Cover and Bot- tom Cover Removing the USB PCB and AntennaRemoving the Main PCB Removing the FPC HDD BATRemoving the PAD PCB MP PCB Remove the 4 Screws. N14 PCBRemoving the Handle and Power SW Removing the Display Unit Removing the LCD Rear Cabinet Hinge L and RRemoving the Inverter PCB, TS PCB and LCD Unit Removing the Antenna PCB L and RSetting the Antenna PCB L and R Screws N2 DRHM5054XA Arranging the Antenna L and R CablesSetting the Inverter PCB, TS PCB and LCD Unit Preparation of InverterSetting the LCD Rear Cabinet, Hinge L and R Assembly of LCD UnitSetting the Display Unit Setting the Handle and Power SWAttach the Power LED Packing Sheet to the LED Spacer Fix the SW LED PCB using the Screw. N5Fix the Palm Top Cover using the 5 Screws. N4 No1 to Set the SW LED PCBAssembly of Power SW Assembly of Palm Top CoverSetting the I/O PCB Setting the SD PCB, Express Card Setting the Main PCB Connect the 2 Cables to the 2 Connectors. CN17,CN27Fix the Screw. N7 Attach the TOP Screws Assembly of LAN, Modem and MDC Assembly of Main PCBSetting the PAD PCB Assembly of PAD PCBSetting the FPC HDD BAT Preparation of HDD FPC AssyDirection C View Tighten Setting the USB PCB and Antenna PCB Assembly of USB PCB and Antenna PCB Setting the Dimm Cover and Bottom Cover Preparation of Dimm Cover Setting the GPS PCB and Bluetooth PCB Screws N11 DFHE5025XA Screws N12 DXQT2+F3FNLSetting the KB Cable Cover, Keyboard and LCD Cable Cover Arranging the KeyboardSetting the HDD Screws N2 DRHM5054XA Screws N5 DRQT26+D4FKLPreparation oh HDD Assy HDD FPC Ass’yPush and bend HDD Thermal Plate SEC Page Setting the Battery Pack and HDD Pack Set the HDD Pack Set the Battery PackXploded View 18 + 0.22 N.m + 0.2 kgf.cm 2 + 0.02 N.m 10-1CF-30CTQAZBM 10-219 + 0.02 N.m 216 + 0.0196 N.m314 + 0.0196 N.m 441 + 0.049 N.m10-4 45 + 0.50 N.m 10-510-6 10-7 Replacement Parts List Comparison Table