Matsushita CF-30CTQAZBM Removing the FPC HDD BAT, Removing the PAD PCB, Removing the Main PCB

Page 27

9.1.9. Removing the FPC HDD BAT

 

 

to Connector (CN8)

 

 

to Connector (CN7)

 

 

<N16>

FPC HDD BAT

 

 

<N4>

 

 

to Connector (CN9)

<N4>

<N4>

 

to Connector (CN800)

<N4>

 

Antenna Cable Sheet

<N4>

 

 

 

 

HDD Cable Cover

 

Tape

to Connector (CN26)

 

Connector(CN10)

 

 

Pad Protect

 

 

 

 

Connector(CN26)

Sheet

 

 

Connector

 

 

 

(CN8)

 

 

 

 

 

 

Tape

Connector

 

 

 

(CN7)

 

 

Connector(CN9)

 

 

 

Pad PCB

 

 

Connector (CN800)

 

 

 

1.Remove the 5 Screws. <N4>

2.Remove the HDD Cable Cover.

3.Remove the Antenna Cable Sheet.

4.Remove the 2 Tapes.

5.Disconnect the 2 Cables from the 2 Connectors. (CN10,CN26)

6.Remove the Tape.

7.Disconnect the Cable from the Connector. (CN9)

8.Remove the Pad Protect Sheet.

9.Disconnect the Cable from the Connector. (CN800)

10.Disconnect the 2 Cables from the 2 Connectors. (CN7,CN8)

11.Remove the Screw. <N16>

12.Remove the FPC HDD BATT.

Screws <N4>: DRQT26+D3FKL

Screws <N16>: DRQT26+E5FKL

9.1.10. Removing the PAD PCB

TP PCB Screw Sheet

Tape <N4>

<N4>

Connector (CN801)

Pad PCB

Connector (CN802)

1.Remove the Tape and disconnect the Cable from the Con- nector. (CN801)

2.Disconnect the Cable from the Connector. (CN802)

3.Remove the TP PCB Screw Sheet.

4.Remove the 2 Screws. <N4>

5.Remove the PAD PCB.

Screws <N4>: DRQT26+D3FKL

9.1.11. Removing the Main PCB

TOP Screw Sheet

<N7>

Connector (CN17)

Connector (CN27)

1.Remove the TOP Screw Sheet.

2.Remove the Screw. <N7>

3.Disconnect the 2 Cables from the 2 Connectors. (CN17,CN27)

9-5

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Model No. CF-30CTQAZBM For U.K This apparatus must be earthed for your safety How to replace the fuseLaser Safety Information Page Page Contents Model No SpecificationsYou need to install to use the feature Age*20, Recover ProTM 6*20Only for model with wireless LAN Only for model with BluetoothNames and Functions of Part E F G Diagram Diagnosis Procedure Troubleshooting Error Diagnosis by Checking Beep Signal Sound Beep signal sound Error messageOutline of Post Stuck key 02F0 CPU ID Self Diagnosis Test Operation of PC-Diagnostic Utility PC-Diagnostic utility End method Content of the setup is returned to the setting of the userSelection of tested device Ty of breakdown Content of standard test Content of enhancing testRecord area frequently accessed All record area is tested Test item StanardTest Item Content of Standard Test Content of Extend TestExpress Card Connector Wiring between Super I/OWiring Connection Diagram Preparation Pack Removing the Battery Pack and HDDBoard Removing the GPS PCB and Blue- tooth PCB Removing the KB Cable Cover and LCD Cable CoverRemoving the USB PCB and Antenna Removing the Dimm Cover and Bot- tom CoverRemoving the FPC HDD BAT Removing the PAD PCBRemoving the Main PCB MP PCB PCB Remove the 4 Screws. N14Removing the Handle and Power SW Hinge L and R Removing the Display Unit Removing the LCD Rear CabinetRemoving the Antenna PCB L and R Removing the Inverter PCB, TS PCB and LCD UnitScrews N2 DRHM5054XA Arranging the Antenna L and R Cables Setting the Antenna PCB L and RPreparation of Inverter Setting the Inverter PCB, TS PCB and LCD UnitAssembly of LCD Unit Setting the LCD Rear Cabinet, Hinge L and RSetting the Handle and Power SW Setting the Display UnitSet the SW LED PCB Attach the Power LED Packing Sheet to the LED SpacerFix the SW LED PCB using the Screw. N5 Fix the Palm Top Cover using the 5 Screws. N4 No1 toAssembly of Palm Top Cover Assembly of Power SWSetting the I/O PCB Setting the SD PCB, Express Card Connect the 2 Cables to the 2 Connectors. CN17,CN27 Setting the Main PCBFix the Screw. N7 Attach the TOP Screws Assembly of Main PCB Assembly of LAN, Modem and MDCAssembly of PAD PCB Setting the PAD PCBPreparation of HDD FPC Assy Setting the FPC HDD BATDirection C View Tighten Setting the USB PCB and Antenna PCB Assembly of USB PCB and Antenna PCB Setting the Dimm Cover and Bottom Cover Preparation of Dimm Cover Screws N11 DFHE5025XA Screws N12 DXQT2+F3FNL Setting the GPS PCB and Bluetooth PCBArranging the Keyboard Setting the KB Cable Cover, Keyboard and LCD Cable CoverScrews N2 DRHM5054XA Screws N5 DRQT26+D4FKL Setting the HDDHDD FPC Ass’y Preparation oh HDD AssyPush and bend HDD Thermal Plate SEC Page Set the HDD Pack Set the Battery Pack Setting the Battery Pack and HDD Pack18 + 0.22 N.m + 0.2 kgf.cm 2 + 0.02 N.m 10-1 Xploded View10-2 CF-30CTQAZBM441 + 0.049 N.m 19 + 0.02 N.m216 + 0.0196 N.m 314 + 0.0196 N.m10-4 10-5 45 + 0.50 N.m10-6 10-7 Replacement Parts List Comparison Table
Top Page Image Contents