Matsushita CF-30CTQAZBM service manual Assembly of LAN, Modem and MDC, Assembly of Main PCB

Page 42

QAssembly of LAN, Modem and MDC

* Notes:

1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2

Pass the Cable to the back from the hole of the A side.

LAN Cable is installed.

Modem Cable is installed.

Tighten of

Order of fixing

Screw

Screw

Screw

Tighten of

Modem LAN Case

Screw

is installed.

5

1

15

1

Attach spac

e

Separate from the coil.

Tighten of

Attach the DMD Cable Sheet

Process the cable and cover

MDC

Tighten of

(Remove 2 places)

with MDM Cable Sheet

Screw

Screw

Match to the edge of the Connector. 1

Safety Working

Cable

Coil

QAssembly of Main PCB

Insert the connector wrapped with the sheet into the connector on the board.

Cable SATA Signal Insertion

12 Safety Working

Sheet wrap

*Notes:

1.Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2

Safety Working

Attach the PET Sheet

Bend the cable avoiding the connector.




							0	1
0	1						0	1
0	1

Insert the FFC of the card connector into the connector on the main board.

Connect the LAN cable.

Do not insert the connector incompletely. (Note: Insert diagonally.)

Put the cable in a U-shape into the intermediate chassis aperture next to the Connector.

Safety Working

Insert the FFC of the card connector into the connector on the main board.

9-20

Image 42

Contents Model No. CF-30CTQAZBM How to replace the fuse For U.K This apparatus must be earthed for your safetyLaser Safety Information Page Page Contents Specifications Model NoOnly for model with Bluetooth Age*20, Recover ProTM 6*20Only for model with wireless LAN You need to install to use the featureNames and Functions of Part E F G Diagram Diagnosis Procedure Troubleshooting Error Diagnosis by Checking Beep Signal Sound Beep signal sound Error messageOutline of Post Stuck key 02F0 CPU ID Self Diagnosis Test Operation of PC-Diagnostic Utility PC-Diagnostic utility End method Content of the setup is returned to the setting of the userSelection of tested device Test item Stanard Content of standard test Content of enhancing testRecord area frequently accessed All record area is tested Ty of breakdownWiring between Super I/O Content of Standard Test Content of Extend TestExpress Card Connector Test ItemWiring Connection Diagram Removing the Battery Pack and HDD Preparation PackBoard Removing the KB Cable Cover and LCD Cable Cover Removing the GPS PCB and Blue- tooth PCBRemoving the Dimm Cover and Bot- tom Cover Removing the USB PCB and AntennaRemoving the FPC HDD BAT Removing the PAD PCBRemoving the Main PCB MP PCB Remove the 4 Screws. N14 PCBRemoving the Handle and Power SW Removing the Display Unit Removing the LCD Rear Cabinet Hinge L and RRemoving the Inverter PCB, TS PCB and LCD Unit Removing the Antenna PCB L and RSetting the Antenna PCB L and R Screws N2 DRHM5054XA Arranging the Antenna L and R CablesSetting the Inverter PCB, TS PCB and LCD Unit Preparation of InverterSetting the LCD Rear Cabinet, Hinge L and R Assembly of LCD UnitSetting the Display Unit Setting the Handle and Power SWFix the Palm Top Cover using the 5 Screws. N4 No1 to Attach the Power LED Packing Sheet to the LED SpacerFix the SW LED PCB using the Screw. N5 Set the SW LED PCBAssembly of Power SW Assembly of Palm Top CoverSetting the I/O PCB Setting the SD PCB, Express Card Setting the Main PCB Connect the 2 Cables to the 2 Connectors. CN17,CN27Fix the Screw. N7 Attach the TOP Screws Assembly of LAN, Modem and MDC Assembly of Main PCBSetting the PAD PCB Assembly of PAD PCBSetting the FPC HDD BAT Preparation of HDD FPC AssyDirection C View Tighten Setting the USB PCB and Antenna PCB Assembly of USB PCB and Antenna PCB Setting the Dimm Cover and Bottom Cover Preparation of Dimm Cover Setting the GPS PCB and Bluetooth PCB Screws N11 DFHE5025XA Screws N12 DXQT2+F3FNLSetting the KB Cable Cover, Keyboard and LCD Cable Cover Arranging the KeyboardSetting the HDD Screws N2 DRHM5054XA Screws N5 DRQT26+D4FKLPreparation oh HDD Assy HDD FPC Ass’yPush and bend HDD Thermal Plate SEC Page Setting the Battery Pack and HDD Pack Set the HDD Pack Set the Battery PackXploded View 18 + 0.22 N.m + 0.2 kgf.cm 2 + 0.02 N.m 10-1CF-30CTQAZBM 10-2314 + 0.0196 N.m 19 + 0.02 N.m216 + 0.0196 N.m 441 + 0.049 N.m10-4 45 + 0.50 N.m 10-510-6 10-7 Replacement Parts List Comparison Table