Matsushita CF-30CTQAZBM service manual Specifications, Model No

Page 7

1 Specifications

Main Specifications

Model No.

 

CF-30CTQAZBM/CF-30CTQEZBM

CPU

 

Intel® Core™ Duo Processor L2400 (1.66 GHz, 2 MB*1 L2 cache, 667 MHz FSB)

Chipset

 

Intel® 945GM

Memory*1*2

 

512 MB (4096 MB Max.)

Video Memory*1*3

UMA (128 MB Max.)

Hard Disk Drive*4

80 GB

Display Method

13.3 XGA type (TFT) with Touchscreen

 

Internal LCD*5

65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots)

 

 

External Display*6

65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots/1280 × 768 dots/1280 × 1024 dots)

Wireless LAN*7

Intel PRO /Wireless 3945 ABG (802.11 a + b + g)

Bluetooth™*8

 

2.0 + EDR

LAN

 

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T

Modem

 

Data: 56 kbps (V.92) FAX: 14.4 kbps

Sound

 

WAVE and MIDI playback, Intel® High DeÞnition Audio subsystem support, Monaural speaker

Security Chip

 

TPM (TCG V1.2 compliant)*9

Card Slot

PC Card

Type I or Type II x 1 (3.3 V: 400 mA, 5 V: 400 mA)

 

 

 

ExpressCard

ExpressCard/34*10 or ExpressCard/54 x 1

 

 

 

SD Memory Card*11

x 1, Data transfer rate = 8 MB per second*12

 

 

 

Smart Card*13

x 1

RAM Module Slot

200-pin, 1.8 V, SO-DIMM, DDR2 SDRAM, PC2-4200 Compliant

Interface

 

USB port (4-pin, USB 2.0) x 3, Serial port (Dsub 9-pin male), Modem port (RJ-11), LAN port

 

 

 

 

(RJ-45), External display port (Mini Dsub 15-pin female), Expansion Bus Connector (Dedicated

 

 

 

 

80-pin female), External Antenna Connector (Dedicated 50 coaxial connector), IEEE 1394a

 

 

 

 

Interface Connector (4-pin x 1), Microphone Jack (Miniature jack, 3.5 DIA, Stereo), Headphone

 

 

 

 

Jack (Miniature jack, 3.5 DIA, Impedance 32 , Output Power 4 mW × 2)

Keyboard / Pointing Device

87 keys / Touch Pad / Touchscreen (Anti-Reßection, Stylus (included) touch capable)

Power Supply

 

AC adaptor or Battery pack

AC Adaptor*14

 

Input: 100 V to 240 V AC, 50 Hz/60 Hz, Output: 15.6 V DC, 5.0 A

Battery Pack

 

Li-ion 10.65 V, 8.55 Ah

 

Operating Time*15

Approx. 4 hours at set to maximum LCD brightness setting (typ: 1000 cd/m2)

 

 

 

 

 

Approx. 5 hours (typ: 500 cd/m2) to Approx. 8 hours (minimum brightness)*16 (Approx. 7 hours*17)

 

Charging

Power on

Main Battery: Approx. 8.5 hours

 

Time*15

 

Main Battery + Second Battery: Approx. 12.5 hours

 

 

 

Power off

Main Battery: Approx. 5 hours

 

 

 

 

Main Battery + Second Battery: Approx. 8 hours

Clock Battery

 

Coin type lithium battery 3.0 V

Power Consumption*18

Approx. 45 W*19 / Approx. 70 W (Maximum when recharging in the ON state)

Physical Dimensions (W × H × D) 302 mm × 67.5 - 69.5 mm × 285 mm {11.9" × 2.7 - 2.8" × 11.3"}

(including the carrying handle)

 

Weight

 

 

Approx. 3.8 kg {Approx. 8.4 lb.}

(including the carrying handle)

 

Operation Environment

Temperature: 5 °C to 35 °C {41 °F to 95 °F}

 

 

 

 

Humidity: 30% to 80% RH (No condensation)

Storage Environment

Temperature: -20 °C to 60 °C {-4 °F to 140 °F}

 

 

 

 

Humidity: 30% to 90% RH (No condensation)

Image 7
Contents Model No. CF-30CTQAZBM For U.K This apparatus must be earthed for your safety How to replace the fuseLaser Safety Information Page Page Contents Model No SpecificationsYou need to install to use the feature Age*20, Recover ProTM 6*20Only for model with wireless LAN Only for model with BluetoothNames and Functions of Part E F G Diagram Diagnosis Procedure Troubleshooting Beep signal sound Error message Error Diagnosis by Checking Beep Signal SoundOutline of Post Stuck key 02F0 CPU ID Self Diagnosis Test Operation of PC-Diagnostic Utility Content of the setup is returned to the setting of the user PC-Diagnostic utility End methodSelection of tested device Ty of breakdown Content of standard test Content of enhancing testRecord area frequently accessed All record area is tested Test item StanardTest Item Content of Standard Test Content of Extend TestExpress Card Connector Wiring between Super I/OWiring Connection Diagram Preparation Pack Removing the Battery Pack and HDDBoard Removing the GPS PCB and Blue- tooth PCB Removing the KB Cable Cover and LCD Cable CoverRemoving the USB PCB and Antenna Removing the Dimm Cover and Bot- tom CoverRemoving the PAD PCB Removing the FPC HDD BATRemoving the Main PCB MP PCB PCB Remove the 4 Screws. N14Removing the Handle and Power SW Hinge L and R Removing the Display Unit Removing the LCD Rear CabinetRemoving the Antenna PCB L and R Removing the Inverter PCB, TS PCB and LCD UnitScrews N2 DRHM5054XA Arranging the Antenna L and R Cables Setting the Antenna PCB L and RPreparation of Inverter Setting the Inverter PCB, TS PCB and LCD UnitAssembly of LCD Unit Setting the LCD Rear Cabinet, Hinge L and RSetting the Handle and Power SW Setting the Display UnitSet the SW LED PCB Attach the Power LED Packing Sheet to the LED SpacerFix the SW LED PCB using the Screw. N5 Fix the Palm Top Cover using the 5 Screws. N4 No1 toAssembly of Palm Top Cover Assembly of Power SWSetting the I/O PCB Setting the SD PCB, Express Card Connect the 2 Cables to the 2 Connectors. CN17,CN27 Setting the Main PCBFix the Screw. N7 Attach the TOP Screws Assembly of Main PCB Assembly of LAN, Modem and MDCAssembly of PAD PCB Setting the PAD PCBPreparation of HDD FPC Assy Setting the FPC HDD BATDirection C View Tighten Setting the USB PCB and Antenna PCB Assembly of USB PCB and Antenna PCB Setting the Dimm Cover and Bottom Cover Preparation of Dimm Cover Screws N11 DFHE5025XA Screws N12 DXQT2+F3FNL Setting the GPS PCB and Bluetooth PCBArranging the Keyboard Setting the KB Cable Cover, Keyboard and LCD Cable CoverScrews N2 DRHM5054XA Screws N5 DRQT26+D4FKL Setting the HDDHDD FPC Ass’y Preparation oh HDD AssyPush and bend HDD Thermal Plate SEC Page Set the HDD Pack Set the Battery Pack Setting the Battery Pack and HDD Pack18 + 0.22 N.m + 0.2 kgf.cm 2 + 0.02 N.m 10-1 Xploded View10-2 CF-30CTQAZBM441 + 0.049 N.m 19 + 0.02 N.m216 + 0.0196 N.m 314 + 0.0196 N.m10-4 10-5 45 + 0.50 N.m10-6 10-7 Replacement Parts List Comparison Table