Matsushita CF-30CTQAZBM Removing the Display Unit Removing the LCD Rear Cabinet, Hinge L and R

Page 31

	9.1.16. Removing the Display Unit	9.1.17. Removing the LCD Rear Cabinet,
	Display Unit	Hinge L and R
	Display Unit	left LCD Cover <N7> <N13>
		left LCD Cover <N7> <N13>
		Side Cover<N7>
	<N9>	<N7>	LCD Rear Cabinet
		<N7>
		<N7>	<N7>
	<N9>		<N7>
	<N9>
	<N9>	<N7>	<N13>
		<N7>
	<N9>	<N7>
	<N9>	<N7>	<N7>
			<N7>
		Wireless Antenna	<N7>
		Wireless Antenna
	<N10>	Corner Cover	<N7>
			<N7>

		<N7>
		LCD Latch <K9-1-4>	right LCD Cover
		Hinge L	Side Cover
		Wireless Antenna
		Corner Cover
		<N10>	<K9-1-4>
		<N10>	Hinge R
			Hinge R

1.Remove the 2 Screws <N10> and the 4 Screws <N9>.

2.Remove the Display Unit.

Screws <N9>: DRYN4+J10FKL

Screws <N10>: DXSB4+15FNLB

LCD Front Cabinet

1.Remove the 4 Screws. <N7>

2.Remove the 2 Wireless Antenna Corner Covers.

3.Remove the 4 Screws <N7> and 2 Screws. <N13>

4.Remove the left and right LCD Cover Side Covers.

5.Remove the 4 Screws. <N7>

6.Remove the LCD Rear Cabinet.

7.Remove the LCD Latch.

8.Remove the 2 Screws. <K9-1-4>

9.Remove the Hinge L and R.

Screws <N2>: DRHM5054XA

Screws <N7>: DRSB26+10HKL

Screws <N13>: DRSB4+10FKL

Screws <K9-1-4>: DRYN4+J10KLT

9-9

Image 31

Contents Model No. CF-30CTQAZBM For U.K This apparatus must be earthed for your safety How to replace the fuseLaser Safety Information Page Page Contents Model No SpecificationsYou need to install to use the feature Age*20, Recover ProTM 6*20Only for model with wireless LAN Only for model with BluetoothNames and Functions of Part E F G Diagram Diagnosis Procedure Troubleshooting Beep signal sound Error message Error Diagnosis by Checking Beep Signal SoundOutline of Post Stuck key 02F0 CPU ID Self Diagnosis Test Operation of PC-Diagnostic Utility Content of the setup is returned to the setting of the user PC-Diagnostic utility End methodSelection of tested device Ty of breakdown Content of standard test Content of enhancing testRecord area frequently accessed All record area is tested Test item StanardTest Item Content of Standard Test Content of Extend TestExpress Card Connector Wiring between Super I/OWiring Connection Diagram Preparation Pack Removing the Battery Pack and HDDBoard Removing the GPS PCB and Blue- tooth PCB Removing the KB Cable Cover and LCD Cable CoverRemoving the USB PCB and Antenna Removing the Dimm Cover and Bot- tom CoverRemoving the PAD PCB Removing the FPC HDD BATRemoving the Main PCB MP PCB PCB Remove the 4 Screws. N14Removing the Handle and Power SW Hinge L and R Removing the Display Unit Removing the LCD Rear CabinetRemoving the Antenna PCB L and R Removing the Inverter PCB, TS PCB and LCD UnitScrews N2 DRHM5054XA Arranging the Antenna L and R Cables Setting the Antenna PCB L and RPreparation of Inverter Setting the Inverter PCB, TS PCB and LCD UnitAssembly of LCD Unit Setting the LCD Rear Cabinet, Hinge L and RSetting the Handle and Power SW Setting the Display UnitSet the SW LED PCB Attach the Power LED Packing Sheet to the LED SpacerFix the SW LED PCB using the Screw. N5 Fix the Palm Top Cover using the 5 Screws. N4 No1 toAssembly of Palm Top Cover Assembly of Power SWSetting the I/O PCB Setting the SD PCB, Express Card Connect the 2 Cables to the 2 Connectors. CN17,CN27 Setting the Main PCBFix the Screw. N7 Attach the TOP Screws Assembly of Main PCB Assembly of LAN, Modem and MDCAssembly of PAD PCB Setting the PAD PCBPreparation of HDD FPC Assy Setting the FPC HDD BATDirection C View Tighten Setting the USB PCB and Antenna PCB Assembly of USB PCB and Antenna PCB Setting the Dimm Cover and Bottom Cover Preparation of Dimm Cover Screws N11 DFHE5025XA Screws N12 DXQT2+F3FNL Setting the GPS PCB and Bluetooth PCBArranging the Keyboard Setting the KB Cable Cover, Keyboard and LCD Cable CoverScrews N2 DRHM5054XA Screws N5 DRQT26+D4FKL Setting the HDDHDD FPC Ass’y Preparation oh HDD AssyPush and bend HDD Thermal Plate SEC Page Set the HDD Pack Set the Battery Pack Setting the Battery Pack and HDD Pack18 + 0.22 N.m + 0.2 kgf.cm 2 + 0.02 N.m 10-1 Xploded View10-2 CF-30CTQAZBM441 + 0.049 N.m 19 + 0.02 N.m216 + 0.0196 N.m 314 + 0.0196 N.m10-4 10-5 45 + 0.50 N.m10-6 10-7 Replacement Parts List Comparison Table