HDD Damper Ass’y
Make sure the product with black sheet on the yellow sponge.
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Push and bend
Fold the FPC from the board edge.
HDD Ass’y
HDD Set Insert after removing the Release Paper of the
Remove the Release Paper on the back, close and attach it.
Attach it to HDD closely not to loosen.
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
When attaching HDD Cushion (Yellow) and HDD Cushion (Black), set the bending part of the metal plate up.
Only the metal plate attached on this side
Displace the edge by 10 mm and fold back.
HDD Thermal Plate |
|
| 1 |
Do not bend it at a sharp | 1 | 2 | 0 |
| |||
angle to put natural R. |
|
|
|
| 2 |
|
|
| 1 |
|
|
To the level of attaching | 2 |
|
|
1 |
|
| |
closely in this range |
|
|
(10) | Longer Direction |
(15)
1
2
1 2
HDD Cushion (Black)
Metal Plate
Attach the HDD Cushion (Yelllow)
Attach the HDD Cushion (Yelllow)
Attach the HDD Cushion (Black)
15 
1
Attach the HDD
Thermal Plate
Prepare the metal plate bend.
Remove the Release Paper.