Minolta CF3102 Calibrating the Printer, Loading Test Paper, Setting Up the Servicing Equipment

Printer Panel 1

7. Calibrating the Printer

7.1Loading Test Paper

Load test pattern paper that can be used with X-Rite calibration.

1. Pull out the paper drawer for Tray 1.

2. Load the prepared A4(C)-size (or Letter(C)- size) plain paper into the paper drawer.

C4004U074AA

3. Close the paper drawer.

4. Make sure that the media type selection dial on the drawer is turned to the setting for plain paper.

5. From the printer panel, select the size of the test paper loaded into Tray 1.

4025U050AA

NOTE

For details on specifying settings, refer to the

User Manual.

7.2Setting Up the Servicing Equipment

Set up the equipment in order to print a test pattern and make the necessary adjustments.

NOTE

Do not turn on any equipment until you are instructed to do so.

(2) (3) (4)

(5)

(6)

(1)

(1)Notebook PC

Starts the External Panel Controller for adjustment.

(2)RS232 straight cable

Connects between the Notebook PC and the connector C of the selector

(3)Selector

Switches between the Notebook PC and the X-Rite, printer

(4)DTP32 cable

Connects between the X-Rite and the connector A of the selector

(5)X-Rite (DTP32) Color Tone Tester

(6)RS232 straight cable

Connects between the printer and the connector B of the selector

4581-7777-01 – 10 –