Minolta CF2002, CF3102 manual Specifying the Printer Controller Settings

Page 42

– 41 –

Printer Panel 1

14. Specifying the Printer Controller Settings

From the printer, specify the necessary settings for using the controller.

1. Turn on the printer.

C4581O014AA

2. Turn on the printer controller.

C4581O015AA

5. Display the Setup Mode screen in the printer panel, press ▲ or ▼ until “Server Setup” appears, and then press the [Set] key.

6.Press the [Menu] key in the printer panel. When “Save Changes” appears, select

		“Yes”, and then press the [Set] key.
		7. In the same way, select “Network Setup”,
		7. In the same way, select “Network Setup”,
		and then press the [Set] key. Select “Proto-
C4581U031AA		col Setup”, “TCP/IP Setup”, then “Ethernet
C4581U031AA		Setup”, and then set “TCP/IP-Ethernet” to
		“Yes” and “Enable AutoIP Config” to “No”.

8. Specify settings for the following.

IP address	: Controller IP address
Subnet Mask	: Subnet mask for the connected network
Default Gateway	: IP address of the default gateway

NOTE

First, check with your network administrator for the settings that should be entered.

9.After selecting the necessary settings, select “Exit TCP/IP Setup”, “Exit Protocol Setup”, then “Exit Network Setup”. Display “Save Changes”, and then press the [Set] key.

10.Press ▲ or ▼ until “Printer Setup” appears, and then press the [Set] key.

11.Press the [Menu] key in the printer panel. When “Save Changes” appears, select “Yes”, and then press the [Set] key.

12.When “Exit Setup” appears, press the [Set] key to restart the printer controller.

3.After several minutes, a printer panel for selecting the language appears. Select the desired language.

4.Select the appropriate Market Region setting.

4581-7777-01

Image 42

Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Package Contents Manuals Precautions Concerning the Installation of the ControllerUnpacking the Accessories UnpackingUnpacking the Printer Removing the Protective Tape and Packing Materials Installing the Unit Installing the Imaging Unit4025U027AA Installing the Toner Cartridge and the Filter Affixing the Label Installing the Manual Holder Affix the label that corresponds with the installed optionsConnecting the Cables Setting Up the Servicing Equipment Calibrating the PrinterLoading Test Paper Setting Up the Selector Connecting the Equipment CablesRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Making System Setting Checking the Date SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter To set the Sleep Mode parameter Select 2/2 Click Energy SaverSelect 2/2 Click Sleep Loading Paper TraySlide the lateral guides against the edges of the paper C4004U141AA Adjusting the Options Checking the Paper Reference Position for PF-118Measure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Specifying the Administrator Access Code Preparing for Installation of the ControllerSelecting the Printer Setting Specifying the Peripheral SettingInstalling the Printer Panel Checking the Contents of the Printer PanelInstall the Printer Panel for the Internal Controller Be careful not to disconnect other connectors accidentally Close the front door Installing the Printer Controller Outline of SetupOperating Environment Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings Checking With a Test Print LED descriptionsInstalling the Patch Files Patch file installation procedureObjective To turn off the printer controller Specifying User’s Choice Settings Entering Setup Mode on the ControllerCommon Settings for Controllers Settings Required for a Local Connection IEEE1284 CentronicsNetwork Printing on a Computer Running Windows SMB printingLPD LPR printing IPP printingNetWare environment Settings for NetWare printing Network Printing on a Macintosh Computer AppleTalk printingChecking Operation After Specifying Settings Installation TroubleshootingPerforming a test print from client PC

Related manuals

Manual 212 pages 52.15 Kb

Manual 156 pages 52.37 Kb