Minolta CF3102, CF2002 manual Connect the three connectors

Page 39

Printer Panel 1

3.Secure the IEEE1284 connector to the con- troller mounting plate using the two screws enclosed with the controller circuit board.

6.Connect the fan connector to the controller circuit board.

C4342u001BA

4. Connect the three connectors.

➁

C4025u911AA

5. Install the fan assembly on top of the shoul- der screws, and then secure it using the three screws (6) for installing the fan.

C4025u913AA

C4025u914AA

7. Install the controller cover, and then secure it using the 16 screws (7) for installing the cover.

Tighten the screw indicated by ➀ first, and then tighten the screw indicated by ➁. The remaining screws can be tightened in any order.

➀C4025u916AA

4581-7777-01

– 38 –

Image 39

Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Installation of the Controller Precautions Concerning the Package Contents ManualsUnpacking the Accessories UnpackingUnpacking the Printer Removing the Protective Tape and Packing Materials Installing the Imaging Unit Installing the Unit4025U027AA Installing the Toner Cartridge and the Filter Affix the label that corresponds with the installed options Affixing the Label Installing the Manual HolderConnecting the Cables Setting Up the Servicing Equipment Calibrating the PrinterLoading Test Paper Connecting the Equipment Cables Setting Up the SelectorRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Checking the Date Setting Making System SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter Select 2/2 Click Energy Saver To set the Sleep Mode parameterSelect 2/2 Click Sleep Tray Loading PaperSlide the lateral guides against the edges of the paper C4004U141AA Checking the Paper Reference Position for PF-118 Adjusting the OptionsMeasure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Specifying the Peripheral Setting Preparing for Installation of the ControllerSelecting the Printer Setting Specifying the Administrator Access CodeInstalling the Printer Panel Checking the Contents of the Printer PanelInstall the Printer Panel for the Internal Controller Be careful not to disconnect other connectors accidentally Close the front door Installing the Printer Controller Outline of SetupOperating Environment Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings LED descriptions Checking With a Test PrintInstalling the Patch Files Patch file installation procedureObjective To turn off the printer controller Entering Setup Mode on the Controller Specifying User’s Choice SettingsSettings Required for a Local Connection IEEE1284 Centronics Common Settings for ControllersSMB printing Network Printing on a Computer Running WindowsIPP printing LPD LPR printingNetwork Printing on a Macintosh Computer AppleTalk printing NetWare environment Settings for NetWare printingChecking Operation After Specifying Settings Installation TroubleshootingPerforming a test print from client PC

Related manuals

Manual 212 pages 52.15 Kb

Manual 156 pages 52.37 Kb