Minolta CF2002, CF3102 manual If the selector is being used, set the selector knob to B

Printer Panel 1

C4004P567CA

Test patterns

6.Check the message that appears, and then click the Start key in the External Panel Con- troller.

Test patterns are printed for the four colors. (Cyan, Magenta, Yellow, Black)

NOTE

•It will take approximately 2 minutes for the test patterns to be printed.

•During printing, do not open the front door. If the front door is opened, restart the pro- cedure from step 3.

9.Check that the dialog box appears, and then click [Yes] in the dialog box.

C4004P572CA

10.When the dialog box appears, the auto-cal strip can be read. Prepare the auto-cal strip.

C4004U568AA

7.After the test patterns are printed, check that the message appears, and then click the Start key in the External Panel Controller.

C4004P569CA

8.Check that the dialog box appears, and then click [OK] in the dialog box.

NOTE

If the selector is being used, set the selector knob to “B”.

C4004P570CA

C4004U571AA

C4004P573CA

11. Insert the auto-cal strip into the X-Rite.

NOTE

Insert the auto-cal strip after “INSERT CAL

STRIP” appears on the X-Rite display.

C4004U574AA

C4004U594CA

4581-7777-01 – 13 –