Minolta CF3102, CF2002 manual Checking With a Test Print, LED descriptions

Page 43

Printer Panel 1

15. Checking With a Test Print

After setting up the controller, print the Configuration page to check that the controller is operating correctly.

16. Connecting the Cables

Use the IEEE1284 (Centronics), or network cable (Category 5 or 5E).

■LED descriptions

1.Press the [Menu] key on the printer panel.

2.Touch the selection button corresponding to

[Print Pages].

The names of the pages that can be printed are displayed.

3. Touch the selection button corresponding to [Configuration].

C4004O596CA

Parallel port

10BaseT/100BaseT Ethernet connector for a twisted-pair cable

10/100 BaseT indicator Off: 10BaseT

On: 100BaseTX

Fiery power indicator

Network connector indicator Off: Network interrupted Flashing: Network running

Fiery HDD indicator

C4581U029CA

4581-7777-01

– 42 –

Image 43

Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Installation of the Controller Precautions Concerning the Package Contents ManualsUnpacking Unpacking the AccessoriesUnpacking the Printer Removing the Protective Tape and Packing Materials Installing the Imaging Unit Installing the Unit4025U027AA Installing the Toner Cartridge and the Filter Affix the label that corresponds with the installed options Affixing the Label Installing the Manual HolderConnecting the Cables Calibrating the Printer Setting Up the Servicing EquipmentLoading Test Paper Connecting the Equipment Cables Setting Up the SelectorRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Checking the Date Setting Making System SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter Select 2/2 Click Energy Saver To set the Sleep Mode parameterSelect 2/2 Click Sleep Tray Loading PaperSlide the lateral guides against the edges of the paper C4004U141AA Checking the Paper Reference Position for PF-118 Adjusting the OptionsMeasure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Specifying the Peripheral Setting Preparing for Installation of the ControllerSelecting the Printer Setting Specifying the Administrator Access CodeChecking the Contents of the Printer Panel Installing the Printer PanelInstall the Printer Panel for the Internal Controller Be careful not to disconnect other connectors accidentally Close the front door Outline of Setup Installing the Printer ControllerOperating Environment Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings LED descriptions Checking With a Test PrintPatch file installation procedure Installing the Patch FilesObjective To turn off the printer controller Entering Setup Mode on the Controller Specifying User’s Choice SettingsSettings Required for a Local Connection IEEE1284 Centronics Common Settings for ControllersSMB printing Network Printing on a Computer Running WindowsIPP printing LPD LPR printingNetwork Printing on a Macintosh Computer AppleTalk printing NetWare environment Settings for NetWare printingInstallation Troubleshooting Checking Operation After Specifying SettingsPerforming a test print from client PC

Related manuals

Manual 212 pages 52.15 Kb

Manual 156 pages 52.37 Kb