Minolta CF2002, CF3102 manual Slide the lateral guides against the edges of the paper

Page 26

Printer Panel 1

9.2Tray 2

1.Prepare paper that meets this product’s specifications.

2. Pull out the paper drawer for Tray 2.

5. Load the paper into the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up.

NOTE

• Do not load so much paper that the top of the stack is higher than the mark indicating

C4004U079AA

the maximum paper capacity.

C4004U076AA

3. Press down on the paper-lifting plate until it locks into place.

C4004U077AA

4. Slide the adjustable paper guides to fit the size of paper to be loaded.

C4004U078AA

• Be careful not to touch the surface of the paper take-up roller with your hands. If the roller has been touched, wipe it with a dry cloth.

6. Slide the lateral guides against the edges of the paper.

NOTE

Check that the lateral guides are pushed up against the edges of the paper.

C4004O108AA

7.Close the paper drawer.

8.From the printer panel, select the size of the paper loaded into Tray 2.

NOTE

For details on specifying settings, refer to the

User Manual.

4581-7777-01

– 25 –

Image 26

Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Package Contents Manuals Precautions Concerning the Installation of the ControllerUnpacking the Printer Unpacking the AccessoriesUnpacking Removing the Protective Tape and Packing Materials Installing the Unit Installing the Imaging Unit4025U027AA Installing the Toner Cartridge and the Filter Affixing the Label Installing the Manual Holder Affix the label that corresponds with the installed optionsConnecting the Cables Loading Test Paper Setting Up the Servicing EquipmentCalibrating the Printer Setting Up the Selector Connecting the Equipment CablesRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Making System Setting Checking the Date SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter To set the Sleep Mode parameter Select 2/2 Click Energy SaverSelect 2/2 Click Sleep Loading Paper TraySlide the lateral guides against the edges of the paper C4004U141AA Adjusting the Options Checking the Paper Reference Position for PF-118Measure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Specifying the Administrator Access Code Preparing for Installation of the ControllerSelecting the Printer Setting Specifying the Peripheral SettingInstall the Printer Panel for the Internal Controller Installing the Printer PanelChecking the Contents of the Printer Panel Be careful not to disconnect other connectors accidentally Close the front door Operating Environment Installing the Printer ControllerOutline of Setup Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings Checking With a Test Print LED descriptionsObjective Installing the Patch FilesPatch file installation procedure To turn off the printer controller Specifying User’s Choice Settings Entering Setup Mode on the ControllerCommon Settings for Controllers Settings Required for a Local Connection IEEE1284 CentronicsNetwork Printing on a Computer Running Windows SMB printingLPD LPR printing IPP printingNetWare environment Settings for NetWare printing Network Printing on a Macintosh Computer AppleTalk printingPerforming a test print from client PC Checking Operation After Specifying SettingsInstallation Troubleshooting

Related manuals

Manual 212 pages 52.15 Kb

Manual 156 pages 52.37 Kb