Minolta CF2002, CF3102 manual Checking the Contents of the Enclosed Interface Kit

Page 38

Printer Panel 1

13.3Checking the Contents of the Enclosed Interface Kit

Before starting to set up, check that the following accessories are included with this unit.
1.	Controller mounting plate	1
2.	Controller cover	1
3.	Power cord cover	1
4.	Fan assembly	1
5.	Shoulder screws	3

13.4Installing the Interface Kit and Printer Controller Circuit Board

NOTE

A Phillips screwdriver is needed in order to install the printer controller circuit board.

6. Screws (6 for installing the circuit board and 3 for installing the fan)

9

7.Screws

(5 for temporary mounting, 11 for installing the controller cover and

	2 for installing the controller)	18
8.	Screws (for installing the power cord cover)	2
9.	CKN clamp	2
10. Installation Guide*		1
11. CD-ROM*		1
*:Cannot be used with the CF2002/CF3102 printer.

➁

➀➂

1.Attach the controller circuit board to the con- troller mounting plate using the three shoul- der screws (5) by tightening them in the following order: ➀, ➁, then ➂.

1	4

9

C4025u912AA

C4025U901AA

2

C4025U902AA

C4025U904AA

5

C4025U905AA

6

C4025U906AA

7

C4025U909AA

10

11

Cd_1

2.Secure the controller circuit board with the six screws (6) for installing the circuit board.

3C4025U908AA

8

C4025U903AAC4025U907AA

C4025u910AA

4581-7777-01

– 37 –

Image 38

Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Package Contents Manuals Precautions Concerning the Installation of the ControllerUnpacking the Printer Unpacking the AccessoriesUnpacking Removing the Protective Tape and Packing Materials Installing the Unit Installing the Imaging Unit4025U027AA Installing the Toner Cartridge and the Filter Affixing the Label Installing the Manual Holder Affix the label that corresponds with the installed optionsConnecting the Cables Loading Test Paper Setting Up the Servicing EquipmentCalibrating the Printer Setting Up the Selector Connecting the Equipment CablesRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Making System Setting Checking the Date SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter To set the Sleep Mode parameter Select 2/2 Click Energy SaverSelect 2/2 Click Sleep Loading Paper TraySlide the lateral guides against the edges of the paper C4004U141AA Adjusting the Options Checking the Paper Reference Position for PF-118Measure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Specifying the Administrator Access Code Preparing for Installation of the ControllerSelecting the Printer Setting Specifying the Peripheral SettingInstall the Printer Panel for the Internal Controller Installing the Printer PanelChecking the Contents of the Printer Panel Be careful not to disconnect other connectors accidentally Close the front door Operating Environment Installing the Printer ControllerOutline of Setup Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings Checking With a Test Print LED descriptionsObjective Installing the Patch FilesPatch file installation procedure To turn off the printer controller Specifying User’s Choice Settings Entering Setup Mode on the ControllerCommon Settings for Controllers Settings Required for a Local Connection IEEE1284 CentronicsNetwork Printing on a Computer Running Windows SMB printingLPD LPR printing IPP printingNetWare environment Settings for NetWare printing Network Printing on a Macintosh Computer AppleTalk printingPerforming a test print from client PC Checking Operation After Specifying SettingsInstallation Troubleshooting

Related manuals

Manual 212 pages 52.15 Kb

Manual 156 pages 52.37 Kb