Printer Panel 1
■Network Printing on a Macintosh Computer AppleTalk printing
Controller settings
(The recommended settings are underlined and the settings within [ ] are the default set- tings.)
Network Setup | Protocol Setup > | Enable AppleTalk | Yes/No [Yes] |
| AppleTalk Setup |
|
|
| AppleTalk Zone | Select the zone | |
|
| ||
|
|
| from the list. |
|
|
|
|
Settings for a Macintosh computer |
|
| |
1.
2.After installation is finished, restart the computer.
3.Select Chooser from the Apple menu.
4.Click the AdobePS icon. (Make sure that AppleTalk is set to [Active].)
5.If zones are listed, select the correct AppleTalk zone.
6.From the Select a PostScript Printer list, select the type of connection used by the controller, and then click [Create].
7.Select the PPD file for the model of the printer that was installed, and then click [OK].
8.Close the Chooser.
■NetWare environment Settings for NetWare printing
The controller supports the following NetWare environments.
NetWare Version | Service | Settings That Must Be Specified |
|
| From the Controller Operation |
|
| Screen |
|
|
|
|
|
|
Netware 4.X | PServer | NDS, Pserver name, NDS context/ |
|
| Tree |
|
|
|
Netware 5.X | PServer/NDPSPrinter | NDS, Pserver name, NDS context/ |
|
| Tree (Only LPR printing with TCP/IP |
|
| is supported in NDPS. |
|
| Specify the TCP/IP settings.) |
|
|
|
Controller settings
(Select the necessary settings according to the user’s environment.)
Network | Protocol Setup > IPX/SPX Setup | IPX Auto Frame | Yes | |
Setup |
|
| Type |
|
|
|
|
|
|
|
|
| Frame Setup | Ethernet 802.2 |
|
|
|
| Ethernet 802.3 |
|
|
|
| Ethernet II |
|
|
|
| Ethernet SNAP |
|
|
|
| |
| Service Setup > | Enable Pserver |
| No |
| PServer Setup |
|
|
|
| NDS Setup | Enable NDS | No | |
|
| |||
|
|
|
|
|
|
|
| Select NDS | Select the tree. |
|
|
| Navigate to the | Select the printer |
|
|
| Print Server | server. |
|
|
|
|
|
|
| Bindery Setup | Add File Server, | Select the tree. |
|
|
| Navigate to the | Select the printer |
|
|
| Print Server | server. |
|
|
|
|
|
|
| NetWare Server Poll Interval (sec) | ||
|
|
|
|
|
PC Settings |
|
|
|
|
1.Start up the Add Printer Wizard, and then select [Network Printer].
2.Display the printer on the network (click [Browse] for Windows 98 and Me, or click [Next] for Windows 2000 and XP), and then select the queue name (name of NDPS Printer Agent for NDPS) for the printer registered with the server.
3.In the dialog where the manufacturer and model of the printer can be selected, click [Have Disk].
4.Click [Browse], select the corresponding folder on the
5.Select the model of the printer from the printer list, and then click [Next].
6.Follow the instructions of the Add Printer Wizard to finish installing the driver.
– 49 – |