1.4Factory User Setting Operation
•Switching of ODA, OEL, and
•The user factory user setting operation is carried out by turning the power ON while keeping both the Menu key and the NEXT+ or LAST- key pressed down.
(1)Factory ODA Setting Operation:
Turn the power ON while keeping the Menu key and NEXT+ key press down.
(2)Factory OEL Setting Operation:
Turn the power ON while keeping the Menu key and LAST- key pressed down.
(3)When the INTA menu key and the PAPER SIZE key are pressed at the same time, the power is turned on.
(4)When the INTL menu key and the TRAY TYPE key are pressed at the same time, the power is turned on.
•After executing a factory user setting operation, set the EEPROM areas which are for other than the engine block, to the factory default values.
Note 1: At the time of shipment from the factory, settings corresponding to the destination are made at the factory.
C - 9