3)Table of parallel I/F signals
Pin No. | Signal Name | Signal Direction | Logic | Compatible | Nibble |
| ECP | Functions |
1 | Data Strobe | → Printer | Negative | nStrobe | Host Clk |
| HostClk | Data strobe |
Data Bit n | ↔ Printer | Positive |
| Data 1(LSB) ~ 8(MSB) | Data line from/to host | |||
10 | Acknowledge | Printer → | Negative | nAck | PtrClk |
| PeriphClk | Completion of reception or function |
11 | Busy | Printer → | Positive | Busy | PtrBusy |
| PeriphAck | Data reception not possible |
12 | Paper End | Printer → | Positive | PError | AckDataReq |
| nAckReverse | No paper |
13 | Select | Printer → | Positive | Select | Xllag |
| Xflag | |
14 | Auto Feed | → Printer | Negative | nAutoFd | HostBusy |
| HostAck | Mode switch request |
15 | — | — | — |
|
| Not definend | Not used | |
16 | 0V | — | — |
|
| Logic Gnd | Signal groud | |
17 | Chassis Groud | — | — |
|
| Chassis Gnd | Frame ground | |
18 | 5V | Printer → | — |
| Peripheral Logic High | Power supply (max. 50mA) | ||
19 | 0V | — | — |
| Signal Ground (nStrobe) | Signal ground | ||
| 0V | — | — |
| Signal Ground (Data 1~ 8) | Signal groud | ||
28 | 0V | — | — |
| Signal Ground (PError, Select, nAck) | Signal Groud | ||
29 | 0V | — | — |
| Signal Ground (Busy, nFault) | Signal groud | ||
30 | 0V | — | — |
| Signal Ground (nAutoFd, nSelectln, nlnit) | Signal groud | ||
31 | Input Prime | → Printer | Negative | nlnit | nlnit |
| nReverseRequest | Initialize |
32 | Fault | Printer → | Negative | nFault | nDataAvail |
| nPeriphRequest | Error occurrrence, |
33 | 0V | — | — |
|
| Not Defined | Signal groud | |
34 | — | — | — |
|
| Not Defined | Not used | |
35 | — | Printer → | — |
|
| Not Defined | Fixed to logic "1" | |
36 | Select In | → Printer | Negative | nSelectln | 1284 Active |
| 1284 Active | Mode switch request |
A - 2