4.3Adjustment When Replacing a Part
4.3.1Adjustment at the Time of Part Replacement (OKIPAGE6e: 300dpi LED head) The following table lists parts that require adjustment after replacement.
Parts | Required Adjustment |
|
|
LED head | LED head drive time |
|
|
Image drum unit | Drum counter reset (Refer to the user's manual for details.) |
|
|
Control P.C.B. | Upload/Download EEPROM data |
|
|
1LED head drive time setting
Caution: Do not change the LED head drive time when the luminous energy indicated on the new LED head is the same as that of the old LED head.
The LED head drive time is set in the LED Head Marking No. on the Engine Menu of the Maintenance Utility. Input the value printed on the serial No. label on the LED head. The last 3 digits indicates the luminous energy of the LED head. (See Fig.
• LED head luminous energy
The last 3 digits indicates the luminous energy of the LED head.
Luminous energy indications
070
314
4 - 12