Oki 6E, 6ex If the normal operation is not, Procedure, use the following, Remedial actions

Table 6-2

Category	LCD status message		Trouble or status	Remedy
Controller errors			An error occurred in the controller.	– Normal operation cannot be
			n = Exception Code	ensured. Turn the power off,
			aaaaaaa = Error Address	then back on to restart.
		ERROR 0n		– If normal operation is not
		aaaaaaaa
				recovered by this restart
				procedure, replace the Main
				Control PCB.
			An error occurred in the controller.	– Turn the power off, then back
				on to recover from the error.
		ERROR nn		– If the normal operation is not
				recovered by this restart
				procedure, use the following
				remedial actions.

6 - 11