(j)Standard tray paper feed setting
•Do no change its default setting since this is a factory setting and were set at the factory.
(k)Second tray paper feed setting
•Do no change its default setting since this is a factory setting and were set at the factory.
(l)Second tray download table selection
•Do not change its default setting since this is a factory setting and were set at the factory.
(m)
•Do not change its default setting since this is a factory setting and were set at the factory.
(n)
•Do not change its default setting since this is a factory setting and were set at the factory.
(o)Setting of standby temperature
(p)Engine test selection
•Do not change its default setting since this is a factory setting and were set at the factory.
(q)Engine reset
•All EEPROM areas used by the engine block are reset to the factory default values. The following items are excluded.
•Menu
•Menu
•Operator panel menu disable/enable
•Head drive time setting
•Head width setting
•Head type setting
•Transfer current setting
•Page print disable/enable
•Transition to the operation mode occurs completion of resetting.
C - 6
