Minolta CF2002, CF3102 Adjusting the Options, Checking the Paper Reference Position for PF-118

Page 28

Printer Panel 1

10. Adjusting the Options

NOTE

•With the printer, the adjustments of each option are performed with the servicing equipment. Therefore, start up the External Panel Controller, and make the adjust- ments with the appropriate setting.

•After adjusting the options, restart the printer.

10.1Checking the Paper Reference Position for PF-118

NOTE

•For details on the installing PF-118, refer to its Setup Instructions.

•To adjust PF-118, follow the instructions below.

1.Load Letter-size (or A4-size) paper into the paper drawer of the optional paper feed unit.

2.Check that the External Panel Controller appears in the computer screen, and then display the Tech. Rep. Mode screen. (For details about displaying the Tech. Rep. Mode screen, refer to the Service Manual.)

C4581P003CA

3. Click “Machine Adjust”.

C4581P004CA

4. Click “PRT Area”.

C4581P014CA

5. Click “Left Margin”.

C4581P015CA

6.Select the key for the paper drawer that is to be adjusted, and then click the Start key in the External Panel Controller.

A test page is printed.

*If two optional paper feed units are installed, perform the same check and adjustment procedures in steps 7 and onward also for the fourth drawer.

4581-7777-01

– 27 –

Image 28

Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Package Contents Manuals Precautions Concerning the Installation of the ControllerUnpacking Unpacking the AccessoriesUnpacking the Printer Removing the Protective Tape and Packing Materials Installing the Unit Installing the Imaging Unit4025U027AA Installing the Toner Cartridge and the Filter Affixing the Label Installing the Manual Holder Affix the label that corresponds with the installed optionsConnecting the Cables Calibrating the Printer Setting Up the Servicing EquipmentLoading Test Paper Setting Up the Selector Connecting the Equipment CablesRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Making System Setting Checking the Date SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter To set the Sleep Mode parameter Select 2/2 Click Energy SaverSelect 2/2 Click Sleep Loading Paper TraySlide the lateral guides against the edges of the paper C4004U141AA Adjusting the Options Checking the Paper Reference Position for PF-118Measure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Preparing for Installation of the Controller Selecting the Printer SettingSpecifying the Administrator Access Code Specifying the Peripheral SettingChecking the Contents of the Printer Panel Installing the Printer PanelInstall the Printer Panel for the Internal Controller Be careful not to disconnect other connectors accidentally Close the front door Outline of Setup Installing the Printer ControllerOperating Environment Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings Checking With a Test Print LED descriptionsPatch file installation procedure Installing the Patch FilesObjective To turn off the printer controller Specifying User’s Choice Settings Entering Setup Mode on the ControllerCommon Settings for Controllers Settings Required for a Local Connection IEEE1284 CentronicsNetwork Printing on a Computer Running Windows SMB printingLPD LPR printing IPP printingNetWare environment Settings for NetWare printing Network Printing on a Macintosh Computer AppleTalk printingInstallation Troubleshooting Checking Operation After Specifying SettingsPerforming a test print from client PC

Related manuals

Manual 212 pages 52.15 Kb

Manual 156 pages 52.37 Kb