Minolta CF2002, CF3102 manual Print another test page and check the paper

Page 30

Printer Panel 1

10.2Checking and Adjusting the Paper Reference Position for PF-121

NOTE

•For details on the installing PF-121, refer to its Setup Instructions.

•To adjust PF-121, follow the instructions below.

1.Load Letter-size (or A4-size) paper into the paper drawer of the large-capacity cabi- net.

2.Check that the External Panel Controller appears in the computer screen, and then display the Tech. Rep. Mode screen. (For details about displaying the Tech. Rep. Mode screen, refer to the Service Manual.)

4. Click “PRT Area”.

C4581P014CA

5. Click “Left Margin”.

C4581P015CA

6.Select the key for the third paper drawer, and then click the Start key in the External Panel Controller.

C4581P003CA

3. Click “Machine Adjust”.

a

Paper Exit Direction

7.Measure the margin from the edge of the paper to the pattern printed in the top-right corner of the test page.

Standard width (a): 3.0 mm ± 1.0 mm

Click the up and down arrows in the lower- right corner of the screen to enter the differ- ence (in millimeters) between the measured width and the standard width.

C4581P004CA

	8. Print another test page and check the paper
C4658U028AA	reference position.

4581-7777-01

– 29 –

Image 30

Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Package Contents Manuals Precautions Concerning the Installation of the ControllerUnpacking the Accessories UnpackingUnpacking the Printer Removing the Protective Tape and Packing Materials Installing the Unit Installing the Imaging Unit4025U027AA Installing the Toner Cartridge and the Filter Affixing the Label Installing the Manual Holder Affix the label that corresponds with the installed optionsConnecting the Cables Setting Up the Servicing Equipment Calibrating the PrinterLoading Test Paper Setting Up the Selector Connecting the Equipment CablesRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Making System Setting Checking the Date SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter To set the Sleep Mode parameter Select 2/2 Click Energy SaverSelect 2/2 Click Sleep Loading Paper TraySlide the lateral guides against the edges of the paper C4004U141AA Adjusting the Options Checking the Paper Reference Position for PF-118Measure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Specifying the Administrator Access Code Preparing for Installation of the ControllerSelecting the Printer Setting Specifying the Peripheral SettingInstalling the Printer Panel Checking the Contents of the Printer PanelInstall the Printer Panel for the Internal Controller Be careful not to disconnect other connectors accidentally Close the front door Installing the Printer Controller Outline of SetupOperating Environment Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings Checking With a Test Print LED descriptionsInstalling the Patch Files Patch file installation procedureObjective To turn off the printer controller Specifying User’s Choice Settings Entering Setup Mode on the ControllerCommon Settings for Controllers Settings Required for a Local Connection IEEE1284 CentronicsNetwork Printing on a Computer Running Windows SMB printingLPD LPR printing IPP printingNetWare environment Settings for NetWare printing Network Printing on a Macintosh Computer AppleTalk printingChecking Operation After Specifying Settings Installation TroubleshootingPerforming a test print from client PC

Related manuals

Manual 212 pages 52.15 Kb

Manual 156 pages 52.37 Kb