Minolta CF3102, CF2002 manual Be careful not to disconnect other connectors accidentally

Page 35

Printer Panel 1

4. Pull out the controller connector.

C4004U239AA

5.Remove the connector cover shown in the illustration.

C4581U004AA

6.Pass the controller connector pulled out in step 5 through the hole as shown.

NOTE

Be careful not to disconnect other connectors accidentally.

C4581U005AA

7. Install the cover as shown in the illustration.

C4581U006AA

8.Insert the connector mentioned in step 6 into the connector on the back of the printer panel for the internal controller.

C4581U007AA

9.Install the printer panel for the internal con- troller in place of the cover removed in step 2.

C4581U008AA

4581-7777-01

– 34 –

Image 35

Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Installation of the Controller Precautions Concerning the Package Contents ManualsUnpacking the Printer Unpacking the AccessoriesUnpacking Removing the Protective Tape and Packing Materials Installing the Imaging Unit Installing the Unit4025U027AA Installing the Toner Cartridge and the Filter Affix the label that corresponds with the installed options Affixing the Label Installing the Manual HolderConnecting the Cables Loading Test Paper Setting Up the Servicing EquipmentCalibrating the Printer Connecting the Equipment Cables Setting Up the SelectorRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Checking the Date Setting Making System SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter Select 2/2 Click Energy Saver To set the Sleep Mode parameterSelect 2/2 Click Sleep Tray Loading PaperSlide the lateral guides against the edges of the paper C4004U141AA Checking the Paper Reference Position for PF-118 Adjusting the OptionsMeasure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Specifying the Peripheral Setting Preparing for Installation of the ControllerSelecting the Printer Setting Specifying the Administrator Access CodeInstall the Printer Panel for the Internal Controller Installing the Printer PanelChecking the Contents of the Printer Panel Be careful not to disconnect other connectors accidentally Close the front door Operating Environment Installing the Printer ControllerOutline of Setup Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings LED descriptions Checking With a Test PrintObjective Installing the Patch FilesPatch file installation procedure To turn off the printer controller Entering Setup Mode on the Controller Specifying User’s Choice SettingsSettings Required for a Local Connection IEEE1284 Centronics Common Settings for ControllersSMB printing Network Printing on a Computer Running WindowsIPP printing LPD LPR printingNetwork Printing on a Macintosh Computer AppleTalk printing NetWare environment Settings for NetWare printingPerforming a test print from client PC Checking Operation After Specifying SettingsInstallation Troubleshooting

Related manuals

Manual 212 pages 52.15 Kb

Manual 156 pages 52.37 Kb