Minolta CF3102, CF2002 manual Measure margin a from the edge

Page 29

Printer Panel 1

 

7. Measure margin a from the edge of the

 

paper to the pattern printed in the test page,

a

and then check that the width of the mea-

sured margin meets its standard width.

 

Standard width of the margin (a):

3.0 mm ± 1.0 mm

Paper Exit

DirectionIf the width of the measured margin does not meet its standard width, follow the procedure in the next section, follow the instructions described below. Position for PF-118, to adjust it.

C4658U028AA

8.Select the paper drawer that you wish to adjust, and then click the up and down arrows in the lower-right corner of the screen to enter the difference between the mea- sured width and the standard width.

9.Print a test page and check the paper refer- ence position.

If the width of the measure margin does not meet its standard width, follow the instruc- tions described below.

10. Open the paper drawer for the cassette that needs to be adjusted, and then remove all of the paper.

11. Loosen the two screws on the guide plate at the bottom of the paper drawer.

C4658U024AA

12. Adjust the guide plate to the appropriate

position on the scale inside the paper drawer.

C4658U025AA

13.Check that the message displayed in the printer panel changes from “Alert Printing suspended” to “Info”.

14.Exit the External Panel Controller.

4581-7777-01

– 28 –

Image 29
Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Installation of the Controller Precautions Concerning the Package Contents ManualsUnpacking the Printer Unpacking the AccessoriesUnpacking Removing the Protective Tape and Packing Materials Installing the Imaging Unit Installing the Unit4025U027AA Installing the Toner Cartridge and the Filter Affix the label that corresponds with the installed options Affixing the Label Installing the Manual HolderConnecting the Cables Loading Test Paper Setting Up the Servicing EquipmentCalibrating the Printer Connecting the Equipment Cables Setting Up the SelectorRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Checking the Date Setting Making System SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter Select 2/2 Click Energy Saver To set the Sleep Mode parameterSelect 2/2 Click Sleep Tray Loading PaperSlide the lateral guides against the edges of the paper C4004U141AA Checking the Paper Reference Position for PF-118 Adjusting the OptionsMeasure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Selecting the Printer Setting Preparing for Installation of the ControllerSpecifying the Administrator Access Code Specifying the Peripheral SettingInstall the Printer Panel for the Internal Controller Installing the Printer PanelChecking the Contents of the Printer Panel Be careful not to disconnect other connectors accidentally Close the front door Operating Environment Installing the Printer ControllerOutline of Setup Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings LED descriptions Checking With a Test PrintObjective Installing the Patch FilesPatch file installation procedure To turn off the printer controller Entering Setup Mode on the Controller Specifying User’s Choice SettingsSettings Required for a Local Connection IEEE1284 Centronics Common Settings for ControllersSMB printing Network Printing on a Computer Running WindowsIPP printing LPD LPR printingNetwork Printing on a Macintosh Computer AppleTalk printing NetWare environment Settings for NetWare printingPerforming a test print from client PC Checking Operation After Specifying SettingsInstallation Troubleshooting
Related manuals
Manual 212 pages 52.15 Kb Manual 156 pages 52.37 Kb