Minolta CF3102, CF2002 Installing the Printer Controller, Operating Environment, Outline of Setup

Page 37

Printer Panel 1

13. Installing the Printer Controller

13.1Operating Environment

The printer controller operates under the following environment.

PCL driver (only for the Windows operating system) and PS driver are available.

Computer		IBM-compatible PC, Mac OS or PowerPC
		Processor: i486DX or higher
		Hard disk free space: 10 MB or more

Operating System		Windows 98, Me and NT 4.0 (SP6 or later): 16 MB or more
and Memory		Windows 2000 (SP2 or later) or XP: 128 MB or more
		Mac OS 8.5 or later: 32 MB or more

Direct Connection		IEEE1284 (Compatible/Nibble/ECP)

Network	Environ-	Standard	Ethernet 10/100BaseT
ment
		Protocol	TCP/IP, AppleTalk,

			IPX/SPX (NetWare 4.x/5.x)

Software		Microsoft Internet Explorer
		Ver. 5.5 or later (Windows OS)
		Ver. 5.0 or later (Mac OS)
		Netscape Communicator
		Ver. 4.5 or later

NOTE

When installing the printer controller onto a printer that has the duplex unit attached, the printer memory must have 512 MB.

13.2Outline of Setup

Set up the printer controller according to the procedures shown below.

Check the contents of the enclosed	p. 37
interface kit.
↓
	p. 37
Install the controller.	p. 37

↓

Specifying the printer controller settings.	p. 41
↓
	p. 42
Checking with a test print.	p. 42
↓
	p. 42
Connect the cables.	p. 42

↓
	p. 43
Install the patch files.	p. 43

↓
Finish
	p. 44
To turn off the printer controller.	p. 44

4581-7777-01

– 36 –

Image 37

Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Installation of the Controller Precautions Concerning the Package Contents ManualsUnpacking Unpacking the AccessoriesUnpacking the Printer Removing the Protective Tape and Packing Materials Installing the Imaging Unit Installing the Unit4025U027AA Installing the Toner Cartridge and the Filter Affix the label that corresponds with the installed options Affixing the Label Installing the Manual HolderConnecting the Cables Calibrating the Printer Setting Up the Servicing EquipmentLoading Test Paper Connecting the Equipment Cables Setting Up the SelectorRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Checking the Date Setting Making System SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter Select 2/2 Click Energy Saver To set the Sleep Mode parameterSelect 2/2 Click Sleep Tray Loading PaperSlide the lateral guides against the edges of the paper C4004U141AA Checking the Paper Reference Position for PF-118 Adjusting the OptionsMeasure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Selecting the Printer Setting Preparing for Installation of the ControllerSpecifying the Administrator Access Code Specifying the Peripheral SettingChecking the Contents of the Printer Panel Installing the Printer PanelInstall the Printer Panel for the Internal Controller Be careful not to disconnect other connectors accidentally Close the front door Outline of Setup Installing the Printer ControllerOperating Environment Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings LED descriptions Checking With a Test PrintPatch file installation procedure Installing the Patch FilesObjective To turn off the printer controller Entering Setup Mode on the Controller Specifying User’s Choice SettingsSettings Required for a Local Connection IEEE1284 Centronics Common Settings for ControllersSMB printing Network Printing on a Computer Running WindowsIPP printing LPD LPR printingNetwork Printing on a Macintosh Computer AppleTalk printing NetWare environment Settings for NetWare printingInstallation Troubleshooting Checking Operation After Specifying SettingsPerforming a test print from client PC

Related manuals

Manual 212 pages 52.15 Kb

Manual 156 pages 52.37 Kb