Minolta CF2002, CF3102 manual Network Printing on a Computer Running Windows, SMB printing

Page 48

Printer Panel 1

19.5Specifying the Settings Necessary for Printing on a Net-

work

The following procedure describes how to specify the settings necessary for printing on a network.

Follow the procedure described below to specify the settings necessary for printing on a network.

1.Refer to [Settings Required for a Local Connection] and install the printer driver. At this time, specify the LPT1 port as the printer port.

NOTE

Do not print a test page yet.

Perform the test print after the network connection settings have been specified.

2.Follow the procedure below to specify the settings necessary for printing on a net- work. Change the printer port from the one specified when the printer driver was installed in step 1 to a port for a network connection, and then change any controller settings as necessary.

NOTE

For IPP printing and NetWare printing, begin from the time when the printer driver was added.

■Network Printing on a Computer Running Windows

Procedure for connecting a network that can be selected for the various Windows operat- ing systems

The procedure for specifying settings differs depending on the output procedure (LPR, Windows printing or IPP).

Follow the appropriate connection procedure for the environment that you are using.

 

Windows

Windows NT

Windows

Windows XP

Protocol

 

98/Me

4.0

2000

 

Used

 

 

 

 

 

 

LPR

 

2

2

2

TCP/IP

SMB

2

2

2

2

 

IPP

 

 

2

2

 

 

 

 

 

 

 

■SMB printing

Controller settings

(The recommended settings are underlined and the settings within [ ] are the default set- tings.)

Network Setup

Protocol Setup >

TCP/IP-Ethernet

Yes/No [Yes]

 

TCP/IP Setup >

 

 

 

Enable AutoIP Config

Yes/No [Yes]

 

Ethernet Setup

 

 

 

 

IP Address

Enter the IP

 

 

 

 

 

address.

 

 

 

 

 

 

Subnet Mask

Enter the subnet

 

 

 

mask.

 

 

 

 

 

 

Gateway Address

Enter the IP

 

 

 

address of the

 

 

 

gateway.

 

 

 

 

 

Service Setup >

Enable Windows Printing

Yes/No [Yes]

 

Windows Setup

 

 

 

Choose Domain

Select from list/

 

 

 

 

 

Enter manually

 

 

 

[Select from list]

 

 

 

 

PC Settings

 

 

•From the window displayed by clicking the Start button, pointing to [Settings], then clicking [Printers], select the printer. Then, from the menu that appears by right-click-

ing the printer, click [Properties]. For Windows 98 and Me:

1.Click the Details tab, and then click [Add Port...].

2.Select [Network], and then click [Browse...].

3.From the console tree showing the network configuration, select the printer with the server name registered in the controller.

4.Click [Close] to close the dialog.

For Windows NT 4.0, 2000 and XP:

1.Click the Ports tab, click [Add Port], double-click [Local Port], and then type in [\\server_name\print].

2.Click [Close] to close the dialog.

4581-7777-01

– 47 –

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Package Contents Manuals Precautions Concerning the Installation of the ControllerUnpacking the Accessories UnpackingUnpacking the Printer Removing the Protective Tape and Packing Materials Installing the Unit Installing the Imaging Unit4025U027AA Installing the Toner Cartridge and the Filter Affixing the Label Installing the Manual Holder Affix the label that corresponds with the installed optionsConnecting the Cables Setting Up the Servicing Equipment Calibrating the PrinterLoading Test Paper Setting Up the Selector Connecting the Equipment CablesRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Making System Setting Checking the Date SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter To set the Sleep Mode parameter Select 2/2 Click Energy SaverSelect 2/2 Click Sleep Loading Paper TraySlide the lateral guides against the edges of the paper C4004U141AA Adjusting the Options Checking the Paper Reference Position for PF-118Measure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Preparing for Installation of the Controller Selecting the Printer SettingSpecifying the Administrator Access Code Specifying the Peripheral SettingInstalling the Printer Panel Checking the Contents of the Printer PanelInstall the Printer Panel for the Internal Controller Be careful not to disconnect other connectors accidentally Close the front door Installing the Printer Controller Outline of SetupOperating Environment Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings Checking With a Test Print LED descriptionsInstalling the Patch Files Patch file installation procedureObjective To turn off the printer controller Specifying User’s Choice Settings Entering Setup Mode on the ControllerCommon Settings for Controllers Settings Required for a Local Connection IEEE1284 CentronicsNetwork Printing on a Computer Running Windows SMB printingLPD LPR printing IPP printingNetWare environment Settings for NetWare printing Network Printing on a Macintosh Computer AppleTalk printingChecking Operation After Specifying Settings Installation TroubleshootingPerforming a test print from client PC
Related manuals
Manual 212 pages 52.15 Kb Manual 156 pages 52.37 Kb
Top Page Image Contents