Minolta CF3102, CF2002 manual LPD LPR printing, IPP printing

Page 49

Printer Panel 1

■LPD (LPR) printing

Controller settings

(The recommended settings are underlined and the settings within [ ] are the default set- tings.)

Network Setup

Protocol Setup >

TCP/IP-Ethernet

Yes/No [Yes]

 

TCP/IP Setup >

 

 

 

Enable AutoIP Config

Yes/No [Yes]

 

Ethernet Setup

 

 

 

 

IP Address

Enter the IP

 

 

 

 

 

address.

 

 

 

 

 

 

Subnet Mask

Enter the subnet

 

 

 

mask.

 

 

 

 

 

 

Gateway Address

Enter the IP

 

 

 

address of the

 

 

 

gateway.

 

 

 

 

 

Service Setup >

Enable LPD

Yes/No [Yes]

 

LPD Setup

 

 

 

 

 

 

PC Settings

 

 

For Windows NT 4.0:

 

 

1. Install the Microsoft TCP/IP Printing service.

•Open Control Panel, and then double-click the Network icon.

•In the Network dialog, click the Services tab, and then click [Add...].

•Select [Microsoft TCP/IP Printing], and then click [OK].

2.Display the printer properties.

3.Click the Ports tab, and then click [Add Port...]. The Printer Ports dialog appears.

4.From the Available Printer Ports, select [LPR Port], and then click [New Ports].

5.In the Add LPR Compatible Printer dialog, type the IP address of the controller into the Name or address of server providing lpd field.

6.Type [print] or [hold] into the Name of printer or print queue on that server field.

7.Specify the printer name and whether the printer will be the default printer and whether a test print will be printed.

8.Click [Close] to close the dialog.

For Windows 2000 and XP:

1.Display the printer properties.

2.Click the Ports tab, and then click [Add Port...]. The Printer Ports dialog appears.

3.From the Available port types list, select [Standard TCP/IP Port], and then click [New Port...].

4.Type the IP address of the controller into the field.

5.Select [Custom], and then click [Setting].

6.Select [LPR].

7.Type [print] or [hold] into the field, and then click [OK].

8.Click [Next], then [Finish] to close the dialog.

■IPP printing

Controller settings

(The recommended settings are underlined and the settings within [ ] are the default set- tings.)

Network Setup

Service Setup >

Enable IPP

Yes/No [Yes]

 

IPP Setup

 

 

 

 

 

 

PC Settings

1.Start up the Add Printer Wizard, and then select [Network Printer].

2.In the Locate Your Printer dialog, select [Connect to a printer on the Internet or on your intranet].

3.Type [http://printer_IP_address/ipp/print] into the URL field.

4.In the dialog where the manufacturer and model of the printer can be selected, click [Have Disk].

5.Click [Browse], select the corresponding folder on the CD-ROM, and then click [OK].

6.Select the model of the printer from the printer list, and then click [Next].

7.Click [Finish] to exit the Add Printer Wizard.

8.Specify the printer name and whether the printer will be the default printer and whether a test print will be printed.

4581-7777-01

– 48 –

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Printer Panel Outline of the CF2002/CF3102 System Setup Precautions Concerning the Installation of the Controller Precautions Concerning the Package Contents ManualsUnpacking Unpacking the AccessoriesUnpacking the Printer Removing the Protective Tape and Packing Materials Installing the Imaging Unit Installing the Unit4025U027AA Installing the Toner Cartridge and the Filter Affix the label that corresponds with the installed options Affixing the Label Installing the Manual HolderConnecting the Cables Calibrating the Printer Setting Up the Servicing EquipmentLoading Test Paper Connecting the Equipment Cables Setting Up the SelectorRite Calibration If the selector is being used, set the selector knob to B C4004P575CA C4004U576AA C4004P580CA C4004P582CA C4004P590CA Click Fin. Time 4581-7777-01 Checking the Date Setting Making System SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List To set the Energy Save Mode parameter Select 2/2 Click Energy Saver To set the Sleep Mode parameterSelect 2/2 Click Sleep Tray Loading PaperSlide the lateral guides against the edges of the paper C4004U141AA Checking the Paper Reference Position for PF-118 Adjusting the OptionsMeasure margin a from the edge Print another test page and check the paper Click Dup. Left Margin Do not measure from the back of the test pat- tern Selecting the Printer Setting Preparing for Installation of the ControllerSpecifying the Administrator Access Code Specifying the Peripheral SettingChecking the Contents of the Printer Panel Installing the Printer PanelInstall the Printer Panel for the Internal Controller Be careful not to disconnect other connectors accidentally Close the front door Outline of Setup Installing the Printer ControllerOperating Environment Checking the Contents of the Enclosed Interface Kit Connect the three connectors Connect the controller power cord to the printer C4581U013AA C4581U026AA Specifying the Printer Controller Settings LED descriptions Checking With a Test PrintPatch file installation procedure Installing the Patch FilesObjective To turn off the printer controller Entering Setup Mode on the Controller Specifying User’s Choice SettingsSettings Required for a Local Connection IEEE1284 Centronics Common Settings for ControllersSMB printing Network Printing on a Computer Running WindowsIPP printing LPD LPR printingNetwork Printing on a Macintosh Computer AppleTalk printing NetWare environment Settings for NetWare printingInstallation Troubleshooting Checking Operation After Specifying SettingsPerforming a test print from client PC
Related manuals
Manual 212 pages 52.15 Kb Manual 156 pages 52.37 Kb
Top Page Image Contents