Minolta CF2002, CF3102 Installing the Patch Files, Objective, Patch file installation procedure

Printer Panel 1

17. Installing the Patch Files

■Objective

The controller is recognized as Minolta printer in a network management tool (EX. PageScope Net Care) at the time of use. In addition, the Minolta logo appears at the top of the PageScope Light page.

NOTE

This patch file is not provided on the CD-ROM supplied with the controller; it must be acquired separately.

■Patch file installation procedure

1.Check that the computer can communicate with the controller through TCP/IP.

2.Install the Command Work Station Utility from the CD-ROM included with the control- ler on the computer.

NOTE

This software can only be used with the Windows operating system.

3. Start up the Command Work Station.

The PageScope Light page appears as shown below before the patch file is installed. Before installing the patch file

C4581P018CA

4. Select the controller from Available Servers, and then click [Add]. After installing the patch file

5.Login with administrator authorization.

6.Select the Job from Import in the File Menu.

7.In the Select File to Import dialog, select the patch file, select [31 C-M] in the Logical Printer, and then click [Import].

8.In order to apply the patch file settings, the controller must be rebooted. After waiting 60 seconds or more, restart the controller.

9.When PageScope Light is accessed, check that the Minolta logo appears on the page, as shown below.

To access PageScope Light:

Enter the IP address of your controller into the Address box of the Web browser. (Example) http://IP address of the controller/

C4581P101CA

4581-7777-01 – 43 –