Minolta CF3102, CF2002 manual Common Settings for Controllers

Printer Panel 1

3. When “Continue to Setup?” appears, select “Yes”, and then press the [Set] key.

C4581U015AA

19.3Common Settings for Controllers

(The recommended settings are underlined and the settings within [ ] are the default set- tings.)

Server Setup	Server Name	Enter the server name.
Printer Setup	Publish Direct	Yes/No [Yes]
	Publish Print Queue	Yes/No [Yes]
	Publish Hold Queue	Yes/No [Yes]

19.4Settings Required for a Local Connection

(IEEE1284 (Centronics))

Controller settings

(The recommended settings are underlined and the settings within [ ] are the default set- tings.)

Network Setup	Port Setup >	Enable Parallel Port	Yes/No [No]
	Parallel Port Setup
		Port Timeout	5-60 [5]
		Ignore EOF	Yes/No [Yes]
PC Settings

1.Start up the Add Printer Wizard, and then click [Next].

2.In the dialog where the printer connection can be selected, select [Local printer], and then click [Next].

3.In the dialog where the manufacturer and model of the printer can be selected, click [Have Disk].

4.Click [Browse], select the setting file from the corresponding folder on the CD-ROM, and then click [OK].

5.Select the model of the printer from the printer list, and then click [Next].

6.Select the LPT1 port, and then click [Next].

7.When [Next] is clicked, installation of the driver will begin.

8.Specify the printer name and whether the printer will be the default printer and whether a test print will be printed.

4581-7777-01 – 46 –