Olivetti 18MF manual Message Procedure

		Troubleshooting
Message	Procedure	Reference
Replace Toner.	Toner has run out so further copying or printing is	page 5-1
	impossible.
	Replace the toner container using a new toner kit.
Scan memory overflow. Job	Press right Select to cancel the copying procedure.	page 4-3,
is canceled.	The total amount of data received by the machine	Advanced
	exceeds the machine’s internal memory. To verify the	Operation
	current amount of memory, print out a Status Page.	Guide
	To cancel printing, press right Select. If Auto Error Clear
	is set to On, printing will be automatically resumed after a
	preset period of time.
	Lower the image quality.
Send error.	An error has occurred during transmission. The possible
####	error codes and their descriptions are as follows.
	1101: The server name of the SMTP server is not set	Advanced
	correctly or the host name is incorrect when sending	Operation
	scan data to an FTP server. Use Embedded Web Server	Guide
	and register the SMTP server name and the host name
	correctly.
	1102: The login user name is incorrect or the domain	page 4-11
	name has not been entered. Enter login name, domain
	name and password correctly.
	1103: The network path name is incorrect or you do not	Advanced
	have access to the folder specified. Use Embedded	Operation
	Web Server and register the path name correctly.	Guide
	1104: No recipient address. Enter e-mail address	page 4-9
	correctly.
	1105: E-mail - The SMTP protocol setting is turned off.	Advanced
	Use Embedded Web Server and turn on the SMTP	Operation
	protocol setting.	Guide
	Scan to PC (SMB) - SMB setting is turned off. Use
	Embedded Web Server and turn on the SMB setting.
	Scan to PC (FTP) - FTP setting is turned off. Use
	Embedded Web Server and turn on the FTP setting.
	1106: The sender address setting under e-mail: SMTP is	Advanced
	not registered. Use Embedded Web Server and register	Operation
	the sender address.	Guide
	210#: The network cable is disconnected or the hub that	page 3-1
	it is connected to is not operating properly. Check the
	cable connection or the hub.
	The server name or the host name of the SMTP server is	Advanced
	not set correctly. Use Embedded Web Server and register
		Operation
	the SMTP server name and the host name correctly.
		Guide
	220#: The network cable has become disconnected	page 3-1
	during transmission or the hub that it is connected to has
	stopped operating. Check the cable connection or the
	hub.

OPERATION GUIDE 6-5