Ultra electronic Prima 3 Ink mode setting, Set the K printing mode2, UV ink level setting

Operation

(continued)

Ink mode setting

Change settings according to the ink ribbon used.

EXIT

> I n k >

Exit User Mode

ENTER

Display the ink ribbon type.

(YMCK:0, YMCKK:4 YMCK+UV:5)

Display only because of automatic setting by RF-ID(Setting is not possible)

> > I n k

T y p e

• It displays the type of ink ribbon that is used in the

Y M C K : 0

printer .

EXIT

MENU

CAUTION

• Concerning printer control spec.

be sure to print by K(Black(B)) when printing with 5-color

ink.(e.g.,YMCK+UV,YMCKK ink)

Press

to select the setting value and pressENTER

to save.

(The electronic beep sounds .The beep will not sound if the buzzer mode setting is set to off.)

> > B l a c k L e v e l

Set the black level K

0 ( S t a n d a r d ) 0

9 gradations can be set

(from –3 to +5, the larger the value the darker the printing)

EXIT

MENU

• Small characters printed in black ink may be blurred or

partially darkened. If this is the case, change the setting.

Press

to select the setting value and pressENTER

to save.

(The electronic beep sounds .The beep will not sound if the buzzer mode setting is set to off.)

> > B l a c k M o d e
	S t a n d a r d
EXIT	MENU
	Press

Set the K printing mode:2 options (Standard and Fine)

•Set to “Fine” mode if blurring still occurs after an increase in “Black Level.” The printing time slightly becomes longer in this setting.

CAUTION

• Set to “Fine” mode to avoid blurring when printing thin by 1 dot lines or small characters.

to select the setting value and press ENTER to save.

> > U V M A C A d r P o s

	U p p e r R i g h t
EXIT	MENU

(The electronic beep sounds .The beep will not sound if the buzzer mode setting is set to off.)

Setting of MAC Address position (Upper Right,Lower Left)

•In the case of UV print, MAC address will be printed with UV ink. It is setting of this MAC address printing position.

Press to select the setting value and press ENTER to save.

(The electronic beep sounds .The beep will not sound if the buzzer mode setting is set to off.)

> > U V	l e v e l
	+ 3 ( T h i c k )
EXIT	MENU
	Press

UV ink level setting.

9 gradations can be set

(from –3 to +5, the larger the value the darker the printing)

CAUTION •

During UV print, printing cards that are poor in heat-resistance or printing under a high temperature may severely distort the cards.

to select the setting value and pressENTER� to save.

(The electronic beep sounds .The beep will not sound if the buzzer mode setting is set to off.)

> > S P - I n k 2 L e v e l	Special ink SP-Ink 2 level.
- 2 ( T h i n )	9 gradations can be set
	(from –3 to +5, the higher the value the darker the printing.)

EXIT	MENU	• Set this darkness level when using a special ink (not yet available).
		to select the setting value and pressENTER
	Press		to save.
	(The electronic beep sounds .The beep will not sound if the buzzer mode setting is set to off.)

32