Ultra electronic Prima 3 user manual Dealer For a magnetic or IC card, encoding error may happen

Page 19

(to the next page)

2. Pull the card bracket back.

The card bracket locks when it reaches the hole.

3. Insert the cards and move the bracket back into position.

Limit the number of cards as the card bracket moves back slightly from the lock position.

CAUTION Setting the cards improperly can cause feed jams. Check that the cards are neatly arranged.

Align the cards neatly with the side

Be sure that the tops of the cards are aligned properly

CAUTION

When moving the card bracket

back into position, do this slowly to avoid jamming your fingers. Leaving the card bracket out of position may cause card jams.

4. Close the card tray.

Push the card tray back into the printer until it no longer moves.

CAUTION

To print pre-printed cards on this printer, determine print layout, color tone and card inserting direction by in advance consulting your

dealer.

Especially for card pre-printed in a dark color such as black, card positioning error may happen.

And for a magnetic or IC card, encoding error may happen.

CAUTION

When handling cards, avoid dusty environment and use the attached gloves.

Dusty cards such as those finger marked may cause improper printing.

Consult your dealer to purchase new gloves.

19

Image 19

Contents Prima Harmonized Standards 89/336/EEC2006/95/EC Relating to electromagnetic compatibilityOperation is subject to the following two conditions Information for USAContents Do not wet the machine with water Do not touch the power plug during electrical stormsManual any time as you need Do not use a line voltage other than instructedDo not touch the power plug with a wet hand Do not use the machine while it has a faultPull out the power plug before cleaning the machine Hold the body of the power plug when pulling it outHandling of transfer film Ink ribbons and cards Product featuresChecking accessories Before useEscape Clause 35% to 70% InstallationTo 86 F Front Slide knob AccessoryPower input jack Names of partsPlease ask your dealer for the Compact IC unit connection Connecting the IC unit Sold separatelyConnecting the Laminator Set-upCheck the plug For AC 120V type Connecting the power cordInstall the unit connecting cable.optional Pin Connecting cablePortion B See the description in Jam Transfer on p.50 Installing the card stackerHang the stacker claw on the stacker receptacle Card stacker is capable of containing approximatelySetting the ink ribbon Insert the cassette along the guide rail When the ink ribbon is wound up to the endWind the ribbon, taking up the slack Close the printer doorRemove the retransfer film cassette Setting the retransfer filmInsert the retransfer film into the cassette Otherwise the printer may fail SlowlyIf the retransfer film is not set properly When the retransfer film is wound up to the endWind the retransfer film to take up the slack Open the printer door and insert the cassetteShown in the illustration Setting cardsThis 300 pieces is not a guaranteed quantity Cassette and/or the ink ribbon cassetteWhen moving the card bracket Dealer For a magnetic or IC card, encoding error may happenConsult your dealer to purchase new gloves See p.34 in this manual Printing on cards with magnetic strips is not guaranteedFor JIS II cards For ISO cardsConnect the printer and host computer with the USB cable Connecting with a host computerConnecting with USB cable Connecting with Ethernet cableWhen connecting a host computer to multiple printers Connecting Multiple PrintersCopyright of the Software is displayed Names of parts on the operation panel BeforeuseLCD operation display content Operation display LED contents LCD panelOperation display LED Ready LED will light up Turning on the powerTurn the power on Represents on and O represents OFF OperationAbout the Reset button Turning off the powerIs loaded User modes User mode screen flowPress Submenu Main menu Submenu To the nextDisplay mode settings Exit user Reset the free counterPress to reset Clearing the free counterSpecial ink SP-Ink 2 level Ink mode settingUV ink level setting Set the K printing mode2Retransfer mode setting Exit user mode Set the buzzer Buzzer mode settingTo select the setting value and press Setting the bend remedy modeSet the bend remedy roller temperature Bend remedy speed settingsUnit No. Setting Card Thickness setting mode IC contact setting modeCoercivity setting mode Non-contact IC antenna setting modeNetwork setting Input method Address Setting mode Download mode setting Low temperature stand-by mode settingSet position of MAC address print Close the card tray CareandcleaningCleaning the cleaning rollers Open the card tray Remove the cleaning unitWipe the head indicated with Cleaning the thermal headCleaning the fan filter See p.14, 16 in this manualSee p.31 in this manual Cleaning the card feed rollers and heat RollersInstall the fan filters back to the original positions If the sponge is removed, attach it again as shown belowSet a cleaning card Cleaning the magnetic headConfirm that the retransfer film cassette has been removed Once printer servicing and cleaning Have been completed Cleaning of the bobbin holdersPeriodical Maintenance Layout of rollers inside the printer TroubleshootingCleaning unit All rollers require routine cleaningTo initialize the unit Error code listingMG mechanical error Hardware errorError MG connection errorMending broken ink ribbon Retransfer film Stopping when printingAbout printing errors When retransfer operation is not completeHopper jam Pull out the card tray Removing card jamsInjury Retransfer section Jam transfer Main specifications Specifications34.3 38.1 External appearance and dimensionsCase of disposal Front viewUltra Electronics Card Systems