Ultra electronic Prima 3 Clearing the free counter, Reset the free counter, Exit user, Mode

(to the next page)

Clearing the free counter Cleaning mode

Reset the free counter.

The [Total] counter and [Head] counter cannot be reset.

> C o u n t e r R e s e t		EXIT
	O K ?

ENTER

	The printer is provided with an operation mode for
	cleaning the card feed roller and the magnetic head to
	keep the printer in the best condition.
	See p.42,43 and p.44 for executing the cleaning mode.
Exit user
	> C l e a n i n g >
mode.

Press to reset.

(The electronic beep sounds .The beep will not sound if the buzzer mode setting

is set to off.)

To check that the counter is reset to zero, select “Free Counter” in “Setting the counter type” on p.29.

ENTER

> > R o l l e r s ENTER

O K ?

ENTER

Select the cleaning item withand press

Execution

(The electronic beep sounds. The beep will not sound if the buzzer mode setting is set to off.)

for execution.

CAUTION

The head counter is cleared to zero

each time the thermal head is replaced.

> > MG H e a d ENTER

O K ?

(The electronic beep sounds . The beep will not sound if the buzzer mode setting is set to off.)

To exit the cleaning mode, turn off the power after cleaning.

31