Programming the Relay Voice Announcer Phone
Number
1.Turn on the Superprint Pro80, the Power light should be lit.
2.Hold down the Program key and press Relay Voice . VOICE NUMBER is displayed.
3.Type the number that a hearing person can call to reach your local TRS.
4.Press Enter . ** RELAY VOICE NUMBER SAVED ** is displayed.
What is a Memo?
A Memo is a short mes- sage that you save in the Superprint Pro80 memory and later send to someone during a conversation.
For information on sav- ing and editing Memos, see Chapter 5.
SEND MEMO
1.At any point during a conversation when it is your turn to type, press
Send Memo . SEND MEMO is
displayed (see Chapter 5 for more information on Memos).
SEND MEMO> PIZZA
Send Memo
2.Begin typing the first few letters of the name of the Memo you want to send. When you have typed enough letters, the whole Memo name is displayed.
If you don’t remember what name is used for the Memo, you can use
the 
keys to look through the list of Memos.
3.Press Enter when the name of the desired Memo is displayed.
The Memo is sent and displayed the same way it would be if you were typing the message during the conversation.
4.Continue the conversation.
EMERGENCY DIAL
Calling an Emergency Number
1.Make sure the Superprint Pro80 is on. The Power light should be lit.
2.Press the Emergency button. ** DIALING EMERGENCY NUMBER
**is displayed briefly. After a short pause, DIALING...911 is displayed.
3.When the other TTY starts ringing, the Superprint Pro80 Signal light flashes slowly and LINE IS RINGING is displayed.
4.When the other person answers the call, his or her Greeting is displayed on your TTY. Type a reply to continue your conversation.
You may choose what number is saved for the Emergency button.
You may choose to save an emergency telephone number for the
Emergency button.
However, this button is provided only as a con- venience. Ultratec assumes no responsibili- ty for customer reliance upon this memory fea- ture.
This button is prepro- grammed with “911.”
A D V A N C E D C A L L I N G • 2 1