Thomas & Betts Limitorque MX Device Net Field Unit How to Order Parts, Regulatory Information

Limitorque MX DeviceNet Field Unit  FCD LMENIM2328-00 – 11/05

•Do not touch the surface of the printed circuit board, the connectors, or the components with conduc- tive devices or with your hands.

•Always place the component or board into an anti-static protective bag for transportation or storage.

•Transport all static-sensitive components only in static-shielding carriers or packages. Place static awareness labels on all components to prevent removal from static-shielding container during transit.

•Handle all static-sensitive components at a static-safe work area including floor mat, wrist strap, air ionizer, ground cord, and conductive table mat.

•Do not subject components to sliding movements over any surface, at any time.

8 How to Order Parts

To order parts or obtain further information about your Limitorque DeviceNet field unit, contact your local Limitorque distributor sales office, or:

Flowserve Corporation Flow Control Division

Limitorque Actuation Systems

5114 Woodall Road

P.O. Box 11318 Lynchburg, VA 24506-1318

Phone (434) 528-4400

Fax (434) 845-9736

To find the Limitorque distributor or sales office near you, go to http://www.limitorque.com

All inquiries or orders must be accompanied by the following information supplied on the actuator nameplate:

•Unit size

•Order number

•Serial number

9 Regulatory Information

The Flowserve Limitorque DeviceNet board has been tested in accordance with the listed specifications and complies with European Directive 89/336 EEC, EMC Directive and 73/23 EEC, Low Voltage Directive;

EN 55011:1998 + A2:2001

EN 61000-6-2:2001

40