Sunway NT 10000 user manual · Allocation of the cable terminal block, Sensor pin name

· Allocation of the cable terminal block:

Pin allocation	Sensor pin name
sensor connector
Pin 1	Plus signal temperature
Pin 2	Plus signal insolation intensity
Pin 3	Plus connection supply +5 V
Pin 4	Earth reference

·Use a small screwdriver. Press the orange terminal. The terminal will open.

·Insert the (at least 11 mm bare) cable into the respective terminal hole.

·Release the pressure from the screw- driver. The cable is now attached to the connection.

·Make sure the cable is connected tightly.

Solar inverter pin name

S-Temp

P-Solar

V+

V-

121