Savin 8700W manual Copying

Page 13

BASIC

SWhen you make a copy on a non-standard size of paper, set the paper on the manual feed table.

SPaper of about the thickness of 51 to 134 g/m2, 14 lb to 36 lb is suitable for this copier.

✏Do not use the following paper. Otherwise, a paper jam might occur.

∙Bent, folded, or creased paper

∙Torn paper

∙Perforated paper

∙Non-smooth paper

∙Slippery paper

∙Thin paper that has low stiffness

✏Do not make a copy on paper with any kind of coating, such as thermosen- sitive paper, art paper, aluminum foil, and carbon paper. Otherwise, a fault might occur.

SIf you make a copy on edged paper, the copy might be creased or a part of the image might not be copied.

SIf you make a copy on rough paper, the copy image might be blurred.

SWhen you make a copy on translucent paper, the copy might be waved.

SWhen you make copies on film, take out the copies delivered to the copy guide one sheet at a time and place them on a flat surface.

6 COPYING

Image 13

Contents Operating Instructions Ifor the main switch Safety During Operation Safety InformationIntroduction Examples Of IndicationsSafety Information Safety Information Table of Contents What to do if Something Goes Wrong Main Unit Copier ExteriorOperation Panel Indicator PanelCopying Recommended Originals BasicRecommended Paper Copying Switching the Fusing Temperature Setting the Number of Copies Repeated Copying Press the Lighter and Darker keys to adjust copy density Adjusting Copy DensitySwitching the Copy Exit Copying Setting a Leading/Trailing Edge Margin Copying Synchro Cutting Copying Onto Roll PaperPreset Cutting Copying Variable Cutting Copying Partial Copying Partial Copying Sample Copying Paper TYPE/ROLL Width Entry Function Press the Fusing Temperature key to select the paper type Programming a Collection of Copy Settings Using the Program FunctionUsing the Program Function Recalling Programmed Settings Copying with Manual Feed Copying with Manual Feed What to do if Something Goes Wrong When the Wait Indicator is LIT Blurred Copies Dirty CopiesSpotty or Partially Blank Copies Creased Copies Waved CopiesWhen a or x is LIT When a and Are Lit When x and Are Lit What to do if Something Goes Wrong When Is Lit When C is LIT When C is LIT What to do if Something Goes Wrong Cutting the Paper Automatically Cutting the Paper Manually When D is LIT or Blinking When D is LIT or Blinking What to do if Something Goes Wrong Page Maintaining Your Copier Functions That can be Reset Copy MAGNIFICATION/CUT Length Adjustment Copy MAGNIFICATION/CUT Length Adjustment DO’S and DON’TS DO’S and DON’TS Daily Maintenance Toner PAPER/TONERInstallation Conditions Where to PUT Your CopierDisposal Space Required for Installing the CopierPower Connection Page Specifications Spirio 700W SpecificationsISO 3rd Roll FeederOther Options