Savin 8700W manual Specifications, Spirio 700W

Page 67

	SPECIFICATIONS
Spirio 700W

Configuration	Console
Scanning	Original moving over a fixed fiber optics array
Photosensitivity Type	OPC drum
Copy Process	Dry electrostatic transfer system
Development	Dry two-component magnetic brush system
Fusing	Heating roll system (oilless)
Originals	Sheet
Original Size	Maximum: 914(W) × 3,600(L) mm, 36" × 142"
	(Maximum width that can be fed: 960 mm, 37.8")
	Minimum: B5K
Copy Size	Maximum: 914(W) × 3,600(L) mm, 36" × 142"
	Minimum: B5K
Warm-up Time	Within 6 minutes
First Copy	Within 18 seconds (A1L)
Copying Speed	5.4 meters/minute, 3 cpm/A0, 7.5 cpm/A1
Reproduction Ratio	Fixed: 1:1 ±0.5%
Paper Feed	2 roll feeders/manual feed
Multi-copy	A0K to B5K: 1 to 10
Advanced Functions	Auto Image Density
	Auto Clear
	Edge Margin (leading or trailing edge: up to ±99 mm
	in 1 mm steps)
	Energy Saver
	Copy Density Adjustment (26 steps)
	Paper Type/Roll Width Entry
	Repeater system
	Switchback (257 to 1,200 mm, 10.2" to 47.2")
	Rear Table (for originals with thickness of 1 mm or less)
	Synchro Cut
	Variable Cut (245 to 3,600 mm, 9.6" to 142")
	Preset Cut (Metric version: 297, 420, 594, 841, 1,189,
	3,600 mm, Inch version: 12", 18", 24", 36", 48", 142")

60 APPENDIX

Image 67

Contents Operating Instructions Ifor the main switch Examples Of Indications Safety InformationSafety During Operation IntroductionSafety Information Safety Information Table of Contents What to do if Something Goes Wrong Main Unit Copier ExteriorOperation Panel Indicator PanelCopying Recommended Originals BasicRecommended Paper Copying Switching the Fusing Temperature Setting the Number of Copies Repeated Copying Press the Lighter and Darker keys to adjust copy density Adjusting Copy DensitySwitching the Copy Exit Copying Setting a Leading/Trailing Edge Margin Copying Synchro Cutting Copying Onto Roll PaperPreset Cutting Copying Variable Cutting Copying Partial Copying Partial Copying Sample Copying Paper TYPE/ROLL Width Entry Function Press the Fusing Temperature key to select the paper type Programming a Collection of Copy Settings Using the Program FunctionUsing the Program Function Recalling Programmed Settings Copying with Manual Feed Copying with Manual Feed What to do if Something Goes Wrong When the Wait Indicator is LIT Blurred Copies Dirty CopiesSpotty or Partially Blank Copies Creased Copies Waved CopiesWhen a or x is LIT When a and Are Lit When x and Are Lit What to do if Something Goes Wrong When Is Lit When C is LIT When C is LIT What to do if Something Goes Wrong Cutting the Paper Automatically Cutting the Paper Manually When D is LIT or Blinking When D is LIT or Blinking What to do if Something Goes Wrong Page Maintaining Your Copier Functions That can be Reset Copy MAGNIFICATION/CUT Length Adjustment Copy MAGNIFICATION/CUT Length Adjustment DO’S and DON’TS DO’S and DON’TS Daily Maintenance Toner PAPER/TONERInstallation Conditions Where to PUT Your CopierDisposal Space Required for Installing the CopierPower Connection Page Specifications Spirio 700W SpecificationsISO 3rd Roll FeederOther Options