Savin 8700W manual Operation Panel, Indicator Panel

Page 9

COPIER EXTERIOR

Operation Panel

Copy Exit key

Switches the direction in which copies are delivered.

→See page 10.

Edge indicators

Displays the margin settings.

Paper Cut Length indicator

Displays the paper cut length.

Cut Select key

Switches the paper cut type.

→See page 14.

Paper Select key

Selects the paper feed type.

→See page 22.

Paper Size key

Switches the paper cut size in the paper feed direction.

→See page 22.

Fusing Temperature key

Switches the fusing unit temperature according to the paper type.

→See page 7.

Roll Edge Cut key

Cuts the paper edge when the roll paper is replaced.

→See page 41.

When you press this key

during copying, the paper Auto Image Density key is cut.

Adjusts the copy density automatically.

→ See page 9.

Indicator Panel

Clear Modes/Energy

Saver key

Cancels all of the current settings. When you hold down this key for three seconds or more, the copier enters the Energy Saver mode allowing you to conserve power. When you press the key again, the Energy Saver mode is cleared.

Program key

Allows you to store various copy settings.

→See page 24.

Edge Margin key

Press to set a margin.

→See page 12.

+/- keys

Specifies a numeric value.

Sample Copy key

Copies an original in 245 mm, 9.6" from its leading edge. → See page 21.

Partial Copy key

Copies a specified part of an original.

→See page 19.

Enter key

/keys

Press to specify the number of copies.

Copy Counter

Displays the number of copies made.

Clear/Stop key

Darker/Lighter keys

Press to adjust the copy density.

→See page 9.

Emergency Stop key

Press to stop copying while the paper or original is being fed.

2

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating Instructions Ifor the main switch Safety During Operation Safety InformationIntroduction Examples Of IndicationsSafety Information Safety Information Table of Contents What to do if Something Goes Wrong Main Unit Copier ExteriorOperation Panel Indicator PanelCopying Recommended Originals BasicRecommended Paper Copying Switching the Fusing Temperature Setting the Number of Copies Repeated Copying Press the Lighter and Darker keys to adjust copy density Adjusting Copy DensitySwitching the Copy Exit Copying Setting a Leading/Trailing Edge Margin Copying Synchro Cutting Copying Onto Roll PaperPreset Cutting Copying Variable Cutting Copying Partial Copying Partial Copying Sample Copying Paper TYPE/ROLL Width Entry Function Press the Fusing Temperature key to select the paper type Programming a Collection of Copy Settings Using the Program FunctionUsing the Program Function Recalling Programmed Settings Copying with Manual Feed Copying with Manual Feed What to do if Something Goes Wrong When the Wait Indicator is LIT Dirty Copies Blurred CopiesSpotty or Partially Blank Copies Creased Copies Waved CopiesWhen a or x is LIT When a and Are Lit When x and Are Lit What to do if Something Goes Wrong When Is Lit When C is LIT When C is LIT What to do if Something Goes Wrong Cutting the Paper Automatically Cutting the Paper Manually When D is LIT or Blinking When D is LIT or Blinking What to do if Something Goes Wrong Page Maintaining Your Copier Functions That can be Reset Copy MAGNIFICATION/CUT Length Adjustment Copy MAGNIFICATION/CUT Length Adjustment DO’S and DON’TS DO’S and DON’TS Daily Maintenance Toner PAPER/TONERInstallation Conditions Where to PUT Your CopierDisposal Space Required for Installing the CopierPower Connection Page Specifications Spirio 700W SpecificationsISO 3rd Roll FeederOther Options
Top Page Image Contents