Savin 8700W manual When C is LIT

Page 45

WHEN C IS LIT

The roll feeder runs out of paper or the roll paper is not set properly. Set paper in the roll feeder.

SSet roll paper for each roll.

SWhen you remove roll paper from a paper spool or set new paper on a spool, place the spool horizontally on a flat surface.

SEven if the roll feeder runs out of paper during repeated copying, you can make the rest of the copies after loading paper.

1 Pull out the roll feeder.

✏Pull out the feeder until it stops.

2Remove the roll paper.

2nd roll

1st roll

3If you replace the third roll, open the third roll feeder cover and remove the roll paper.

38 WHAT TO DO IF SOMETHING GOES WRONG

Image 45

Contents Operating Instructions Ifor the main switch Safety During Operation Safety InformationIntroduction Examples Of IndicationsSafety Information Safety Information Table of Contents What to do if Something Goes Wrong Main Unit Copier ExteriorOperation Panel Indicator PanelCopying Recommended Originals BasicRecommended Paper Copying Switching the Fusing Temperature Setting the Number of Copies Repeated Copying Press the Lighter and Darker keys to adjust copy density Adjusting Copy DensitySwitching the Copy Exit Copying Setting a Leading/Trailing Edge Margin Copying Synchro Cutting Copying Onto Roll PaperPreset Cutting Copying Variable Cutting Copying Partial Copying Partial Copying Sample Copying Paper TYPE/ROLL Width Entry Function Press the Fusing Temperature key to select the paper type Programming a Collection of Copy Settings Using the Program FunctionUsing the Program Function Recalling Programmed Settings Copying with Manual Feed Copying with Manual Feed What to do if Something Goes Wrong When the Wait Indicator is LIT Dirty Copies Blurred CopiesSpotty or Partially Blank Copies Creased Copies Waved CopiesWhen a or x is LIT When a and Are Lit When x and Are Lit What to do if Something Goes Wrong When Is Lit When C is LIT When C is LIT What to do if Something Goes Wrong Cutting the Paper Automatically Cutting the Paper Manually When D is LIT or Blinking When D is LIT or Blinking What to do if Something Goes Wrong Page Maintaining Your Copier Functions That can be Reset Copy MAGNIFICATION/CUT Length Adjustment Copy MAGNIFICATION/CUT Length Adjustment DO’S and DON’TS DO’S and DON’TS Daily Maintenance Toner PAPER/TONERInstallation Conditions Where to PUT Your CopierDisposal Space Required for Installing the CopierPower Connection Page Specifications Spirio 700W SpecificationsISO 3rd Roll FeederOther Options