Savin 8700W manual Using the Program Function

Page 32

USING THE PROGRAM FUNCTION

4Specify values for each setting.

You can store the following settings with the Program function. For the way to specify values, see the corresponding pages.

∙Sample copying → See page 21.

∙Partial copying (The start and end points cannot be stored) → See page 19.

∙Paper feeder → See page 22.

∙Copy exit → See page 10.

∙Margins → See page 12.

∙Cut type → See page 14.

∙Number of copies → See page 8.

∙Copy density → See page 9.

∙Fusing temperature → See page 7.

✏You can also store the paper type and roll width. However, these settings cannot be changed with the Program function. When you specify a paper feeder, the paper type and roll width specified with the Paper Type/Roll Width Entry function (see page 22) are stored.

5Press the Enter key.

The copy settings are stored.

6If you store settings for another program number, repeat 2 to 5.

7Press the Program key.

The lamp on the Program key lights.

✏The settings are also stored when you press the Program key instead of the Enter key.

COPYING 25

Image 32

Contents Operating Instructions Ifor the main switch Safety Information Safety During OperationIntroduction Examples Of IndicationsSafety Information Safety Information Table of Contents What to do if Something Goes Wrong Copier Exterior Main UnitIndicator Panel Operation PanelCopying Basic Recommended OriginalsRecommended Paper Copying Switching the Fusing Temperature Setting the Number of Copies Repeated Copying Adjusting Copy Density Press the Lighter and Darker keys to adjust copy densitySwitching the Copy Exit Copying Setting a Leading/Trailing Edge Margin Copying Copying Onto Roll Paper Synchro CuttingPreset Cutting Copying Variable Cutting Copying Partial Copying Partial Copying Sample Copying Paper TYPE/ROLL Width Entry Function Press the Fusing Temperature key to select the paper type Using the Program Function Programming a Collection of Copy SettingsUsing the Program Function Recalling Programmed Settings Copying with Manual Feed Copying with Manual Feed What to do if Something Goes Wrong When the Wait Indicator is LIT Spotty or Partially Blank Copies Dirty CopiesBlurred Copies Waved Copies Creased CopiesWhen a or x is LIT When a and Are Lit When x and Are Lit What to do if Something Goes Wrong When Is Lit When C is LIT When C is LIT What to do if Something Goes Wrong Cutting the Paper Automatically Cutting the Paper Manually When D is LIT or Blinking When D is LIT or Blinking What to do if Something Goes Wrong Page Maintaining Your Copier Functions That can be Reset Copy MAGNIFICATION/CUT Length Adjustment Copy MAGNIFICATION/CUT Length Adjustment DO’S and DON’TS DO’S and DON’TS Daily Maintenance PAPER/TONER TonerWhere to PUT Your Copier Installation ConditionsSpace Required for Installing the Copier DisposalPower Connection Page Specifications Specifications Spirio 700W3rd Roll Feeder ISOOther Options