Savin 8700W manual When the Wait Indicator is LIT

Page 37

WHEN THE "WAIT" INDICATOR IS LIT

You cannot start copying while the "Wait" indicator is lit.

Check indicators on the operation panel and take action according to the instructions shown below.

SIf no indicator is lit on the operation panel, check that the power is on.

Indication	Corrective action
x is lit.	Remove the misfed paper. → See page 35.

A is lit.	Remove the misfed original. → See page 34.

C is lit.	Load paper in the roll feeder. → See page 38.

D is lit or blinking.	Add toner. → See page 43.

E is lit or blinking.	The toner bottle is filled with used toner. Contact your
	service representative.

M is lit.	Any cover is open at the roll feeder or other unit of the
	copier.
	Close the cover.

L is lit.	Something goes wrong with the copier. Contact your
	service representative.
	The paper cut length indicator displays alphabetical
	characters or numerals. You should also inform the
	service representative of these values.

u is lit.	Set the key counter.

30 WHAT TO DO IF SOMETHING GOES WRONG

Image 37

Contents Operating Instructions Ifor the main switch Safety During Operation Safety InformationIntroduction Examples Of IndicationsSafety Information Safety Information Table of Contents What to do if Something Goes Wrong Main Unit Copier ExteriorOperation Panel Indicator PanelCopying Recommended Originals BasicRecommended Paper Copying Switching the Fusing Temperature Setting the Number of Copies Repeated Copying Press the Lighter and Darker keys to adjust copy density Adjusting Copy DensitySwitching the Copy Exit Copying Setting a Leading/Trailing Edge Margin Copying Synchro Cutting Copying Onto Roll PaperPreset Cutting Copying Variable Cutting Copying Partial Copying Partial Copying Sample Copying Paper TYPE/ROLL Width Entry Function Press the Fusing Temperature key to select the paper type Programming a Collection of Copy Settings Using the Program FunctionUsing the Program Function Recalling Programmed Settings Copying with Manual Feed Copying with Manual Feed What to do if Something Goes Wrong When the Wait Indicator is LIT Blurred Copies Dirty CopiesSpotty or Partially Blank Copies Creased Copies Waved CopiesWhen a or x is LIT When a and Are Lit When x and Are Lit What to do if Something Goes Wrong When Is Lit When C is LIT When C is LIT What to do if Something Goes Wrong Cutting the Paper Automatically Cutting the Paper Manually When D is LIT or Blinking When D is LIT or Blinking What to do if Something Goes Wrong Page Maintaining Your Copier Functions That can be Reset Copy MAGNIFICATION/CUT Length Adjustment Copy MAGNIFICATION/CUT Length Adjustment DO’S and DON’TS DO’S and DON’TS Daily Maintenance Toner PAPER/TONERInstallation Conditions Where to PUT Your CopierDisposal Space Required for Installing the CopierPower Connection Page Specifications Spirio 700W SpecificationsISO 3rd Roll FeederOther Options