Savin 8700W manual Safety Information

Page 5

SAFETY INFORMATION

RCautions:

o∙ After you move the copier, lock it in position with the caster fixture. If you do not, the copier might move or fall causing personal injury.

m∙ Do not lean on the original tray or copy table otherwise they might fall causing personal injury.

r∙ When you move the copier, unplug the power cord form the wall outlet to avoid fire or electric shock.

t∙ When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causing fire or electric shock.

m∙ Keep the copier away from humidity and dust. A fire or an electric shock might occur.

∙Do not place the copier on an unstable or tilted surface. If it topples over it could cause injury.

r∙ When the copier will not be used for a long time, unplug the power cord.

o∙ If you use this copier in a confined space, make sure there is a continuous air turnover.

m∙ Do not reuse stapled paper. Do not use aluminum foil, paper containing carbon or other conductive paper. A fire might occur.

n∙ When removing misfed paper, do not touch the fusing section because it could be very hot.

R∙ This copier has been tested for safety using this supplier’s parts and consumable. We recommend you only use these specified supplies.

iii

Image 5

Contents Operating Instructions Ifor the main switch Safety During Operation Safety InformationIntroduction Examples Of IndicationsSafety Information Safety Information Table of Contents What to do if Something Goes Wrong Main Unit Copier ExteriorOperation Panel Indicator PanelCopying Recommended Originals BasicRecommended Paper Copying Switching the Fusing Temperature Setting the Number of Copies Repeated Copying Press the Lighter and Darker keys to adjust copy density Adjusting Copy DensitySwitching the Copy Exit Copying Setting a Leading/Trailing Edge Margin Copying Synchro Cutting Copying Onto Roll PaperPreset Cutting Copying Variable Cutting Copying Partial Copying Partial Copying Sample Copying Paper TYPE/ROLL Width Entry Function Press the Fusing Temperature key to select the paper type Programming a Collection of Copy Settings Using the Program FunctionUsing the Program Function Recalling Programmed Settings Copying with Manual Feed Copying with Manual Feed What to do if Something Goes Wrong When the Wait Indicator is LIT Spotty or Partially Blank Copies Dirty CopiesBlurred Copies Creased Copies Waved CopiesWhen a or x is LIT When a and Are Lit When x and Are Lit What to do if Something Goes Wrong When Is Lit When C is LIT When C is LIT What to do if Something Goes Wrong Cutting the Paper Automatically Cutting the Paper Manually When D is LIT or Blinking When D is LIT or Blinking What to do if Something Goes Wrong Page Maintaining Your Copier Functions That can be Reset Copy MAGNIFICATION/CUT Length Adjustment Copy MAGNIFICATION/CUT Length Adjustment DO’S and DON’TS DO’S and DON’TS Daily Maintenance Toner PAPER/TONERInstallation Conditions Where to PUT Your CopierDisposal Space Required for Installing the CopierPower Connection Page Specifications Spirio 700W SpecificationsISO 3rd Roll FeederOther Options