Savin 8700W manual What to do if Something Goes Wrong

Page 47

WHEN C IS LIT

7Feed the paper under the paper feed roller until it stops. Then turn the knob until the paper edge extrudes from under the cover by about 150 mm, 5.9" (cover closed).

✏If the roll paper is damp, rotate the knob so that the paper edge extrudes from under the cover by about 1,000 mm, 39.4" (cover closed).

8For the third roll, feed the paper under the paper feed roller. Then rotate the knob until the paper edge appears in the center of the paper confirmation window.

Close the third roll feeder cover.

Turn the knob until the paper edge extrudes from the cover by about 150mm, 5.9" (cover closed).

40 WHAT TO DO IF SOMETHING GOES WRONG

Image 47

Contents Operating Instructions Ifor the main switch Examples Of Indications Safety InformationSafety During Operation IntroductionSafety Information Safety Information Table of Contents What to do if Something Goes Wrong Main Unit Copier ExteriorOperation Panel Indicator PanelCopying Recommended Originals BasicRecommended Paper Copying Switching the Fusing Temperature Setting the Number of Copies Repeated Copying Press the Lighter and Darker keys to adjust copy density Adjusting Copy DensitySwitching the Copy Exit Copying Setting a Leading/Trailing Edge Margin Copying Synchro Cutting Copying Onto Roll PaperPreset Cutting Copying Variable Cutting Copying Partial Copying Partial Copying Sample Copying Paper TYPE/ROLL Width Entry Function Press the Fusing Temperature key to select the paper type Programming a Collection of Copy Settings Using the Program FunctionUsing the Program Function Recalling Programmed Settings Copying with Manual Feed Copying with Manual Feed What to do if Something Goes Wrong When the Wait Indicator is LIT Spotty or Partially Blank Copies Dirty CopiesBlurred Copies Creased Copies Waved CopiesWhen a or x is LIT When a and Are Lit When x and Are Lit What to do if Something Goes Wrong When Is Lit When C is LIT When C is LIT What to do if Something Goes Wrong Cutting the Paper Automatically Cutting the Paper Manually When D is LIT or Blinking When D is LIT or Blinking What to do if Something Goes Wrong Page Maintaining Your Copier Functions That can be Reset Copy MAGNIFICATION/CUT Length Adjustment Copy MAGNIFICATION/CUT Length Adjustment DO’S and DON’TS DO’S and DON’TS Daily Maintenance Toner PAPER/TONERInstallation Conditions Where to PUT Your CopierDisposal Space Required for Installing the CopierPower Connection Page Specifications Spirio 700W SpecificationsISO 3rd Roll FeederOther Options