Panasonic AW-PH360N manual Mounting example when the camera side is heavy

Page 15

Installation (The installation work must be performed by your dealer without fail.)

• Stand-alone installation

<Mounting example: when the camera side is heavy>

Adjust the balance by moving the camera mounting plate.

or

<Mounting example: when the lens side is heavy>

Adjust the balance by moving the camera mounting plate.

When the pan/tilt head is set at suspended installation, change the position of guide screws and guide pin B to adjust the balance as well as the stand-alone installation.

or

<Recommended lenses>

	Camera	Lens

	AW-E350	AW-LZ16MD55P
	AW-E350	AW-LZ10MD6
		AW-LZ10MD6

	AW-E650	AW-LZ16MD73P
	AW-E655	AW-LZ16AF7G

	AW-E750	AW-LZ17MD9AG
	AW-E860	AW-LZ17MD9AG
	AW-E860

- 15 -

Image 15

Contents AW-PH360N Indicates safety information FCC Note Contents AccessoriesIntroduction Installation precautions Precautions for use Parts and their functions Tilting arm Suspended installation Stand-alone installation $ Assembling the pan/tilt headOAttaching the tilting arm For a precise landing For suspended installationFor stand-alone installation For a soft landingConnector printed circuit board $ Transmission signal selection settingOAnalog/IEEE1394 card settings Oweb card settings Osdi settings$ Setting the cable compensation circuit of video signals When using the AW-RP605A controllerWhen using the AW-RP400 controller $ Installing the pan/tilt head $ Mounting the camera Suspended installationMounting example when the lens side is heavy Mounting example when the camera side is heavyOAttaching the chain With the AW-E350/AW-E650With the AW-E655/AW-E750/AW-E860 OAdjusting slack in the chain OMounting a cameraWith the AW-E350/AW-E650 With the AW-E655/AW-E750/AW-E860 Connections Monitor Connections Compensation unit Zoom lens RS-232C cable AW-CA28T9 $ Connecting the connector panel RS-232C controlAs viewed from cable end $ Head connector panelConnector Pb OUT connector DC 12V in terminal board $ Connecting the AC adapter for use with the pan/tilt head10BASE-T $ Connection examplesAW-PS300A AC adapter AW-PS300A Equivalent to UTP Category 5 straight Cable, max ft 10 m Equivalent to Belden AW-RP605A Coaxial cable Camera cable supplied Panel is used to control the camera Coaxial cable Belden 8281, max ft m Color monitor AW-RC400 Connections Personal computer Belden 8281, max AW-CA50F29 AW-CA50E29 Limiters OFor the controller AW-RP301/AW-RP305/AW-RP501/AW-RP505 $ Setting/releasing the limitersOFor the controller AW-RP605A OFor the controller AW-RP400 $ Replacing the gear Replacement of consumable parts$ Replacing the battery $ Replacing the motorSpecifications $ Functions/performance Page Page Panasonic Broadcast & Television Systems Company