Panasonic AW-PH360N manual $ Head connector panel, As viewed from cable end

Page 23

Connections

$ Head connector panel

The camera and lens control cables are connected to this panel.

1ND/EXT connector

4CAMERA I/F connector

This is for controlling the ND filter and lens extender of the power lens unit. Connect it when using a power lens unit equipped with an ND filter and lens extender function.

ND signal	CVCC (+15V)
ND return	CGND

EXT return

EXT signal

(As viewed from cable end)

2LENS I/F connector

This is for convertible camera control. Connect this to the I/F REMOTE connector on the camera with the supplied camera cable.

This is for controlling the zoom/focus functions of the power lens unit. Connect the remote (zoom/focus) control cable of the power lens unit here.

3SDI IN connector

This is for SDI signal input.

Using a coaxial cable (BELDEN 8281), connect this with the SDI OUT connector of an SDI card (AW-PB504N, etc.) installed in the convertible camera.

- 23 -

Image 23

Contents AW-PH360N Indicates safety information FCC Note Introduction ContentsAccessories Installation precautions Precautions for use Parts and their functions Tilting arm OAttaching the tilting arm Suspended installation Stand-alone installation$ Assembling the pan/tilt head For a precise landing For suspended installationFor stand-alone installation For a soft landingConnector printed circuit board $ Transmission signal selection settingOAnalog/IEEE1394 card settings Oweb card settings Osdi settingsWhen using the AW-RP400 controller $ Setting the cable compensation circuit of video signalsWhen using the AW-RP605A controller $ Installing the pan/tilt head $ Mounting the camera Suspended installationMounting example when the lens side is heavy Mounting example when the camera side is heavyWith the AW-E655/AW-E750/AW-E860 OAttaching the chainWith the AW-E350/AW-E650 With the AW-E350/AW-E650 With the AW-E655/AW-E750/AW-E860 OAdjusting slack in the chainOMounting a camera Connections Monitor Connections Compensation unit Zoom lens RS-232C cable AW-CA28T9 $ Connecting the connector panel RS-232C controlAs viewed from cable end $ Head connector panelConnector Pb OUT connector DC 12V in terminal board $ Connecting the AC adapter for use with the pan/tilt head10BASE-T $ Connection examplesAW-PS300A AC adapter AW-PS300A Equivalent to UTP Category 5 straight Cable, max ft 10 m Equivalent to Belden AW-RP605A Coaxial cable Camera cable supplied Panel is used to control the camera Coaxial cable Belden 8281, max ft m Color monitor AW-RC400 Connections Personal computer Belden 8281, max AW-CA50F29 AW-CA50E29 Limiters OFor the controller AW-RP301/AW-RP305/AW-RP501/AW-RP505 $ Setting/releasing the limitersOFor the controller AW-RP605A OFor the controller AW-RP400 $ Replacing the gear Replacement of consumable parts$ Replacing the battery $ Replacing the motorSpecifications $ Functions/performance Page Page Panasonic Broadcast & Television Systems Company