Panasonic AW-PH360N manual Specifications

Page 48

Specifications

 

 

 

 

 

 

 

Power supply:

DC +12 V (connector)

 

 

 

Power consumption: DC +12

V 3 A (camera power included),

 

 

 

 

DC +12

V 1.3 A (pan/tilt head only)

 

 

 

 

 

 

 

 

 

 

 

 

1 indicates safety information.

Genlock input:

Black burst or composite video (BNC connector)

Camera video output: Video: 75 (BNC connector)

Y:75 (BNC connector)

Pr:

75

(BNC connector) (Switchable to SDI)

Pb:

75

(BNC connector)

SDI:

BNC connector (Switchable to Pr)

Camera / pan/tilt head control:

• Controller (AW-RP301/AW-RP305)

Pan/tilt head control: RS-422 (RJ-45, modular jack)

• Controller (AW-RP501/AW-RP505)

Pan/tilt head control: RS-422 (RJ-45, modular jack)

Camera control: Interactive serial communication (BNC connector)

• Controller (AW-RP605A)

Camera / Pan/tilt head control: RS-422 (RJ-45, modular jack)

• Controller (AW-RP400)

Camera / Pan/tilt head control: RS-485 (RJ-45, modular jack)

• Controller (Personal computer, etc.)

Camera / Pan/tilt head control: RS-232C (28 pin, half pitch connector)

Lamp control:

Control signals (connector)

Option control:

Control signals (connector)

Maximum cable length:

• Controller (AW-RP301/AW-RP305/AW-RP501/AW-RP505/AW-RP400)

500 m (with BELDEN 8281 coaxial cable, 10BASE-T straight cable equivalent to UTP category 5)

• Controller (AW-RP605A)

1000 m (with BELDEN 8281 coaxial cable, 10BASE-T straight cable equivalent to UTP category 5)

When the SDI signal is transmitted: 200 m with BELDEN 8281 coaxial cable

Maximum load capacity: 8.8 lb (4 kg)

Allowable operating temperature:

14°F to 113°F (–10°C to +45°C)

- 48 -

Image 48
Contents AW-PH360N Indicates safety information FCC Note Contents AccessoriesIntroduction Installation precautions Precautions for use Parts and their functions Tilting arm Suspended installation Stand-alone installation $ Assembling the pan/tilt headOAttaching the tilting arm For suspended installation For stand-alone installationFor a soft landing For a precise landing$ Transmission signal selection setting OAnalog/IEEE1394 card settings Oweb card settingsOsdi settings Connector printed circuit board$ Setting the cable compensation circuit of video signals When using the AW-RP605A controllerWhen using the AW-RP400 controller $ Installing the pan/tilt head Suspended installation $ Mounting the cameraMounting example when the camera side is heavy Mounting example when the lens side is heavyOAttaching the chain With the AW-E350/AW-E650With the AW-E655/AW-E750/AW-E860 OAdjusting slack in the chain OMounting a cameraWith the AW-E350/AW-E650 With the AW-E655/AW-E750/AW-E860 Connections Monitor Connections Compensation unit $ Connecting the connector panel RS-232C control Zoom lens RS-232C cable AW-CA28T9$ Head connector panel As viewed from cable endConnector Pb OUT connector $ Connecting the AC adapter for use with the pan/tilt head DC 12V in terminal board$ Connection examples 10BASE-TAW-PS300A AC adapter AW-PS300A Equivalent to UTP Category 5 straight Cable, max ft 10 m Equivalent to Belden AW-RP605A Coaxial cable Camera cable supplied Panel is used to control the camera Coaxial cable Belden 8281, max ft m Color monitor AW-RC400 Connections Personal computer Belden 8281, max AW-CA50F29 AW-CA50E29 Limiters $ Setting/releasing the limiters OFor the controller AW-RP301/AW-RP305/AW-RP501/AW-RP505OFor the controller AW-RP605A OFor the controller AW-RP400 Replacement of consumable parts $ Replacing the battery$ Replacing the motor $ Replacing the gearSpecifications $ Functions/performance Page Page Panasonic Broadcast & Television Systems Company