Limiters
OFor the controller AW-RP605A
1.To set the upper limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the upper limit.
While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 47 
.
The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.
To release the setting:
While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 47 
.
The setting is released when the lamp of the TRACING/PRESET MEMORY button 50 [LIMIT OFF] comes on.
2.To set the lower limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the lower limit.
While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 46 
.
The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.
To release the setting:
While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 46 
.
The setting is released when the lamp of the TRACING/PRESET MEMORY button 50 [LIMIT OFF] comes on.
3.To set the left-most limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the left- most limit.
While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 44 
.
The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.
To release the setting:
While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 44 
.
The setting is released when the lamp of the TRACING/PRESET MEMORY button 50 [LIMIT OFF] comes on.
4.To set the right-most limit position of the travel range:
Using the controller, tilt the camera to the position which is to serve as the
While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 45 
.
The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.
To release the setting:
While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 45 
.
The setting is released when the lamp of the TRACING/PRESET MEMORY button 50 [LIMIT OFF] comes on.
- 45 -