Panasonic AW-PH360N manual OAttaching the chain, With the AW-E350/AW-E650

Page 16

Installation (The installation work must be performed by your dealer without fail.)

OAttaching the chain

1.Attach one end of the chain to the pan/tilt head using a chain attachment screw (M4!8 mm: with flat washer/spring washer).

2.Position the other end of the chain over the screw hole on the top of the camera and attach it using a chain attachment screw (M4!6 mm: with flat washer/spring washer).

<Notes>

OBe sure to tighten all screws firmly with a screwdriver or similar tool.

OWhen the hole on the camera is M2.6, attach the chain with the M2.6!6 mm (with flat washer/spring washer) chain attachment screw.

OWhen using the AW-E860/AW-E750/ AW-E655 camera, the mounting spacer must be attached to the top panel of the camera before attaching the chain. Position the end of the chain over the hole on the mounting spacer and attach it using a chain attachment screw

(M4!6 mm: with flat washer/spring washer).

Be sure to tighten the mounting spacer and all screws firmly with a screwdriver or similar tool.

This chain is for use with the AW-E350, AW-E650, AW-E655, AW-E750 and AW-E860 convertible cameras. It cannot be used with any other camera.

When attaching any other camera to the pan/tilt head, carefully check the pan/tilt head operation and that appropriate measures have been taken to ensure the camera does not fall.

With the AW-E350/AW-E650

Chain attachment screw

M4!6 mm or M2.6!6 mm: with flat washer/spring washer

Chain

Chain attachment screw

M4!8 mm: with flat washer/spring washer

Chain

Chain attachment screw M4!8 mm: with flat washer/spring washer

With the AW-E655/AW-E750/AW-E860

Chain attachment screw

 

M4!6 mm: with

 

flat washer/spring

Chain

washer

Mounting spacer (included with the AW-E655/AW-E750/AW-E860)

Chain attachment screw

M4!8 mm: with flat washer/spring washer

- 16 -

Page 15 Page 17
Image 16
Page 15 Page 17
Contents AW-PH360N Indicates safety information FCC Note Accessories ContentsIntroduction Installation precautions Precautions for use Parts and their functions Tilting arm $ Assembling the pan/tilt head Suspended installation Stand-alone installationOAttaching the tilting arm For suspended installation For stand-alone installationFor a soft landing For a precise landing$ Transmission signal selection setting OAnalog/IEEE1394 card settings Oweb card settingsOsdi settings Connector printed circuit boardWhen using the AW-RP605A controller $ Setting the cable compensation circuit of video signalsWhen using the AW-RP400 controller $ Installing the pan/tilt head Suspended installation $ Mounting the cameraMounting example when the camera side is heavy Mounting example when the lens side is heavyWith the AW-E350/AW-E650 OAttaching the chainWith the AW-E655/AW-E750/AW-E860 OMounting a camera OAdjusting slack in the chainWith the AW-E350/AW-E650 With the AW-E655/AW-E750/AW-E860 Connections Monitor Connections Compensation unit $ Connecting the connector panel RS-232C control Zoom lens RS-232C cable AW-CA28T9$ Head connector panel As viewed from cable endConnector Pb OUT connector $ Connecting the AC adapter for use with the pan/tilt head DC 12V in terminal board$ Connection examples 10BASE-TAW-PS300A AC adapter AW-PS300A Equivalent to UTP Category 5 straight Cable, max ft 10 m Equivalent to Belden AW-RP605A Coaxial cable Camera cable supplied Panel is used to control the camera Coaxial cable Belden 8281, max ft m Color monitor AW-RC400 Connections Personal computer Belden 8281, max AW-CA50F29 AW-CA50E29 Limiters $ Setting/releasing the limiters OFor the controller AW-RP301/AW-RP305/AW-RP501/AW-RP505OFor the controller AW-RP605A OFor the controller AW-RP400 Replacement of consumable parts $ Replacing the battery$ Replacing the motor $ Replacing the gearSpecifications $ Functions/performance Page Page Panasonic Broadcast & Television Systems Company
Top Page Image Contents